Plant Sheet

The Plant sheet is the most important part of the Protocol Spreadsheet. It is structured in various tasks for the user, e.g. entering the basic data for a plant, define how the plant is accounted for and what process steps are covered by the plant by defining the inventory boundaries.

Please note: A company must add a separate Plant sheet for each of its plants! Additional Plant sheets can be created with the button "New Plant Sheet" in line001. For transferring plant data from version 3.04 to version 3.1 of the Protocol Spreadsheet use the button "New Plant Sheet Transfer V3.04 > V3.1". In the section “Plant Sheet Transfer” you will find a step-by-step description on how to use the Plant Sheet Transfer. It is recommended to name all Plant sheets as "Plant_xyz", with xyz replaced for example by the name of the plant.

Tasks

• Set General Plant Information
• Define Inventory Boundaries: Coverage of Main Process Steps
• Data on Clinker and Cement Production
• Calculate Dust Production Leaving the Kiln System
• Enter Kiln Fuel Consumption
• Enter Non-Kiln Fuel Consumption
• Enter Power Balance
• Provide Information on Waste Heat Use

FAQs

• See FAQs on General Plant Information plus subsequent FAQ's

Line-by-Line

• See Line-by-Line for a line by line reference

See Also