Line-by-Line

Line-by-Line | Line-by-Line - only input lines | Line-by-Line - only calculated lines | List of Key Performance Indicators (KPI)

Note that the Cement CO2 and Energy Protocol and the Protocol Spreadsheet have a specific line number index (see Column B in the Excel® file). These line numbers are used throughout all documents of the Protocol. They differ from the Excel® row numbers. In the Internet Manual, the index of line numbers consists of the word “line” and the line number with three digits. For some lines a small letter is added to the number, e.g. “line059c”.

Plant Sheet

General Plant Information

Table 4: Plant Sheet - General Plant Information

Line Title Comment

001

Plant

Unit name
Type text input
Instruction: Enter here the name of the plant for which you want to report in this Plant sheet. You can use letters, numbers and spaces. You can use the button called "New plant sheet" to create a new Plant sheet in your Protocol Spreadsheet.You can also use the button "New Plant Sheet Transfer 3.04 > 3.1" to create a new Plant sheet and use it either for transferring data from CSI Protocol version 3.04 to version 3.1 or for imports from company databases. Note: All general plant information, e.g. the country and contintent, schould be enterd according to the location and specification of the plant! (and not according to the company).

See also

002

Company

Unit name
Type text input
Instruction: Enter here the name of the company to which the plant above belongs. You can use letters, numbers and spaces.

See also

003

Country

Unit select
Type selection
Comment: Selection needed
Instruction: Please choose the country in which your plant is located. The drop-down list shows the names of several countries around the world. If the name of your country is not included, you can choose “other” Africa, Asia, America or Europe according to the continent to which your country belongs. Note: All general plant information, e.g. the country and contintent, schould be enterd according to the location and specification of the plant! (and not according to the company).

See also

004

Continent

Unit select
Type selection
Comment: Selection needed
Instruction: Please choose the continent in which your plant is located, e.g., if your plant is located in Italy as country, then you should choose Europe as continent. Note: All general plant information, e.g. the country and contintent schould be enterd according to the location and specification of the plant! (and not according to the company).

See also

005

"Kyoto" Region (Annex 1 or non-Annex 1)

Unit select
Type selection
Instruction: This line has a drop-down list which contains only two choices: Annex1 and Non-Annex1. Choose the Kyoto region to which your company belongs. Annex I to the UNFCCC lists the developed country Parties which have special responsibilities in meeting the objective of the Convention. They include the OECD countries (excl. Mexico and Korea), the countries of Eastern Europe, Russia, and the European Union.

See also

006

Kiln types

Unit select
Type selection
Comment: Selection needed
Instruction: Here you can choose the type of kiln used in your plant. In the drop-down list you can find the kiln types which are defined as categories in the CSI Protocol version 3. Alternatively, you can choose N/A when this information is not available.

See also

006a

Nominal clinker capacity*

Unit [t/d]
Type number input
Comment: Selection needed
Comment: You can select the range from a drop- down list, so you do not have to enter it.
Instruction: Here you can select the range in which your nominal daily clinker capacity lies, e.g. if your plant nominal clinker capacity is 1500 tonnes per day then you should select " 501 < X < 2000 ".

See also

006b

Plant type*

Unit select
Type selection
Comment: Selection needed
Instruction: From a drop-down list, select the type of the plant for which you are filling in this sheet. You have many choices which distinguish the types of plant depending on the production process which is carried out at the plant level, e.g. plants which are only used for the production of grey cement are defined under the selection "Grey Cement". If this plant is not in use during the year for which you are filling in the sheet, you should select "Not in use". If your plant type is not included in the drop-down list you can choose "Other plant".

See also

007

Shares owned by Company

Unit [%]
Type number input
Comment: Please note that the value entered should be a percentage.
Instruction: Enter a number showing the percentage of shares owned by the company here. e.g. if your company shares amount to half of the plant, then you should enter 50%. Do not enter a percentage higher than 100%.

See also

007aa

Third party verification*

Unit select
Type selection
Comment: Selection needed
Instruction: Here please select the status of assurance or in other words third party verification. You will find the possible selections for this input in the drop-down list. Refer to the Protocol Guidance Document, Chapter 8 and Appendix A8, for further information on managing quality and requirements for assurance.

See also

007ab

Used Cement CO2 and Energy Protocol version*

Unit name
Type text input
Comment: Fixed value for all calculations and data processed with this spreadsheet
Instruction: The Protocol version is a fixed value related to the version of the Protocl Spreadsheet and all calculations performed in it.
Default value: V3.1

See also

007ac

Short notes or user comment (max. 250 characters)*

Unit name
Type text input
Instruction: Enter your remarks and comments regarding the data of a specific plant and reporting year in this field
Default value: (n.a.)

See also

* Click to see changes in V3

Inventory Boundaries: Coverage of Main Process Steps

Table 5: Plant Sheet - Inventory Boundaries: Coverage of Main Process Steps

Line Title Comment
"Yes" means that energy consumption and emissions data for the project step are reported

007a

Raw material supply (quarrying, mining, crushing)*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that energy consumption and emissions data for the raw material supply (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007b

Preparation of raw materials, fuels and additives*

Unit [yes, no or n.a.]
Type selection
Comment: If you select "yes", some additional lines will appear in this sheet.
Instruction: "yes" means that energy consumption and emissions data for the preparation of raw materials, fuels and additives (kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007c

Kiln operation (pyro-processing)*

Unit [yes, no or n.a.]
Type selection
Comment: If you select "yes", some additional lines will appear in this sheet.
Instruction: "yes" means that energy consumption and emissions data for the kiln operation (pyro-processing, calcination CO2, kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007d

Cement grinding, blending*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that energy consumption and emissions data for the cement grinding and blending (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “No” needs explanation why "No" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007e

On-site (internal) transport*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that energy consumption and emissions data for the on-site (internal) transport (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007f

Off-site transport with company-owned fleets*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that energy consumption and emissions data for the off-site transport with company owend fleets (non-kiln fuels) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007g

On-site power generation*

Unit [yes, no or n.a.]
Type selection
Comment: If you select "yes", some additional lines may appear in this sheet.
Instruction: "yes" means that energy consumption and emissions data for the on-site power generation (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007h

Room heating and cooling*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that energy consumption and emissions data for the room heating and cooling (non-kiln fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. The Plant sheet will expand and contract relevant sections of lines. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007i

(add other processes as appropriate)*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that energy consumption and emissions data for the additional process steps (fuels, power) are reported. "n.a." (not applicable) means that the source does not exist at this plant, or that emissions are never generated from this source. "no" means that emissions are generated as a result of the process step, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

007j

use of internal cement transfer for blending*

Unit [yes, no or n.a.]
Type selection
Instruction: "yes" means that internal cement transfers for blending are reported. "n.a." (not applicable) means that these transfers do not exist at this plant. "no" means that these transferes exist, but the data are not reported -- The selection of “no” needs explanation why "no" was used. This explanation can be included (or referenced) in a short note or user comment in line007ac. Apply the complete inventory boundary definition by selecting the relevant reporting year in line007k, column E.

See also

 

007k

Select year to copy and apply inventory boundaries (7a - 7j)*

Unit select
Type selection
Comment: Use macro in line7k, column E, to copy and apply inventory boundaries to specific reporting years.

See also

007n

1.) Select calcination CO2 method (A1; A2; B1; B2) B1=Standard (no seperate calcination sheet needed).*

Unit select
Type selection
Comment: Select method for reporting CO2 emissions from raw material calcination. Use macro in column E to create coresponding calcination sheet, if missing.
Comment: The selection of the calculation method will open few input lines in the Plant sheet. When you use the button, you will create an additional calcination sheet in your Protocol Spreadsheet. This is only requiered if you choose a method other than the default which is B1. Selection is possible if kiln operation (line 7c) is yes.
Default value: B1

Used in lines: ​line034d​

See also

* Click to see changes in V3

Clinker and Cement Production

Table 6: Plant Sheet - Clinker and Cement Production

Line Title Comment

008

Clinker production

Unit [t/yr]
Type number input
Comment: Actual clinker production of active kilns
Validation: Validation Ranges for plant with kiln operation: 0 - 10,000,000

Used in lines: ​line011​ , ​line021a​ , ​line021b​ , ​line035d​ , ​line036​ , ​line060​ , ​line060a​ , ​line060b​ , ​line073​ , ​line063a​ , ​line063b​ , ​line093​ , ​line098​

See also

009

Clinker bought from other companies and from cross-border transfer*

Unit [t/yr]
Type number input
Comment: Amount of clinker purchased from other companies. See Section 7.4 of guidance document for details on company-internal transfers.

Used in lines: ​line011​ , ​line049c​ , ​line091​

See also

010

Clinker sold to other companies and from cross-border transfer*

Unit [t/yr]
Type number input
Comment: Amount of clinker sold to other companies. See Section 7.4 of guidance document for details on company-internal transfers.

Used in lines: ​line011​ , ​line049c​ , ​line091​

See also

010a

Change in clinker stocks (+ = increase; - = reduction)*

Unit [t/yr]
Type number input
Comment: Amount of clinker added to stocks (positive sign) or taken from stocks (negative sign), (=stock at end minus stock at start of the year).
Comment: Please make sure that you have entered the value with the correct sign.

Used in lines: ​line011​

See also

010b

Internal clinker transfer (+ = clinker received; - = clinker sent)*

Unit [t/yr]
Type number input
Comment: Amount of clinker transfers with other plants belonging to the same company
Comment: Please make sure that you have entered the value with the correct sign.

Used in lines: ​line011​ , ​line049c​ , ​line091​

See also

010c

Clinker from internal transfer of processed cement (+ = cement received; - = cement sent)*

Unit [t/yr]
Type number input
Comment: Amount of clinker transfers with cement transferes with other plants belonging to the same company
Comment: Transferred cements, that are not further processed at plant are excluded.

Used in lines: ​line011​ , ​line049c​ , ​line091​

See also

011

Total clinker consumed

Unit [t/yr]
Type calculated
Comment: The calculated value which will be shown in this line (normally only if you have made the entries above) represents the consumed clinker at the plant level which is used for cement production. so you should not enter any values in this line.
Formula: IF(COUNTBLANK( ​line008​ : ​line010c​ )=6,"", ​line008​ + ​line009​ - ​line010​ - ​line010a​ + ​line010b​ + ​line010c​ )

Used in lines: ​line020​ , ​line021​ , ​line091​ , ​line092a​ , ​line092​

See also

012

Gypsum

Unit [t/yr, dry weight]
Type number input
Comment: Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000

Used in lines: ​line018​

See also

013

Limestone

Unit [t/yr, dry weight]
Type number input
Comment: Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation: Validation Ranges for plant with kiln operation: 0 - 500,000; Validation Ranges for grinding centre:0 - 500,000

Used in lines: ​line018​

See also

014

Slag

Unit [t/yr, dry weight]
Type number input
Comment: Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation: Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: ​line018​

See also

015

Fly ash (for blending)

Unit [t/yr, dry weight]
Type number input
Comment: Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation: Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: ​line018​

See also

016

Puzzolana

Unit [t/yr, dry weight]
Type number input
Comment: Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation: Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: ​line018​

See also

017

Others (e.g., CKD added to cement mill)

Unit [t/yr, dry weight]
Type number input
Comment: Only mineral components used for portland cement and blended cement, excl. MIC used for slag cement production
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000

Used in lines: ​line018​

See also

017a

MIC from internal transfer of processed cement (+ = cement received; - = cement sent)*

Unit [t/yr, dry weight]
Type number input
Comment: Amount of MICs transfers between plants belonging to the same company
Comment: Transferred cements, that are not further processed at plant are excluded.
Validation: Validation Ranges for plant with kiln operation: 0 - 1,000,000; Validation Ranges for grinding centre:0 - 1,000,000

Used in lines: ​line018​

See also

018

Total MIC consumed for Portland and blended cements (dry weight)

Unit [t/yr, dry weight]
Type calculated
Comment: The value shown in this line is the sum of the values you have entered above in this section.
Formula: IF(COUNTBLANK( ​line012​ : ​line017a​ )=7,"",SUM( ​line012​ : ​line017a​ ))

Used in lines: ​line020​ , ​line021​ , ​line021a​

See also

019a

Processed slag sold externally*

Unit [t/yr, dry weight]
Type number input
Comment: This is pure slag, dried and/or ground on-site and sold externally (no company-internal transfer)
Validation: Validation Ranges for plant with kiln operation: 0 - 3,000,000; Validation Ranges for grinding centre:0 - 3,000,000

Used in lines: ​line019​

See also

019b

Processed fly ash and other puzzolana sold externally*

Unit [t/yr, dry weight]
Type number input
Comment: This is fly ash and other puzzolana, dried and/or ground on-site and sold externally (no company-internal transfer)
Validation: Validation Ranges for plant with kiln operation: 0 - 3,000,000; Validation Ranges for grinding centre:0 - 3,000,000

Used in lines: ​line019​

See also

019c

Total internal processed MIC transfer (+ = received; - = sent)*

Unit [t/yr, dry weight]
Type number input
Comment: Total amount of MICs processed on-site and transfered between plants of the same company (not sold to or purchaesd from other companies)
Validation: Validation Ranges for plant with kiln operation: 0 - 3,000,000; Validation Ranges for grinding centre:0 - 3,000,000

Used in lines: ​line019​

See also

019

Total processed MIC's used as clinker or cement substitute sold externally*

Unit [t/yr, dry weight]
Type calculated
Formula: IF(COUNTBLANK( ​line019a​ : ​line019c​ )=3,"",SUM( ​line019a​ : ​line019c​ ))

Used in lines: ​line021​ , ​line021a​

See also

020

Total Portland and Blended cements

Unit [t/yr]
Type calculated
Comment: Total cement produced (all types together except pure slag cement and direct fly ash sales)
Formula: IF(OR( ​line011​ ="", ​line018​ =""),"", ​line011​ + ​line018​ )

Used in lines: ​line092a​

See also

021

Total cements + substitutes: Portland, Blended, Slag, etc.

Unit [t/yr]
Type calculated
Comment: Total cements produced, excluding clinker sold, including clinker bought. Portland + Blended + Slag cements incl. direct fly ash sales
Validation: Validation Ranges for plant with kiln operation: 0 - 15,000,000; Validation Ranges for grinding centre:0 - 15,000,000
Formula: IF(OR( ​line011​ ="", ​line018​ ="", ​line019​ =""),"", ​line011​ + ​line018​ + ​line019​ )

Used in lines: ​line092​ , ​line097​ , ​line098c​

See also

021a

Total cementitious products

Unit [t/yr]
Type calculated
Comment: Total clinker produced plus MIC consumed for blending and production of cement substitutes, including clinker sold, excluding clinker bought
Validation: Validation Ranges for plant with kiln operation: 0 - 15,000,000; Validation Ranges for grinding centre:0 - 15,000,000
Formula: IF(OR( ​line008​ ="", ​line018​ ="", ​line019​ =""),"", ​line008​ + ​line018​ + ​line019​ )

Used in lines: ​line062​ , ​line062a​ , ​line062b​ , ​line074​ , ​line082c​ , ​line082a​ , ​line082b​

See also

021b

Total cement equivalent*

Unit [t/yr]
Type calculated
Comment: Calculated based on Clinker production and Clinker/cement (eq.) ratio
Validation: Validation Ranges for plant with kiln operation: 0 - 15,000,000
Formula: IF(OR( ​line008​ ="", ​line008​ =0, ​line092a​ ="n. appl."),"n. appl.", ​line008​ / ​line092a​ )

Used in lines: ​line063​ , ​line063a​ , ​line063b​ , ​line075​ , ​line082c​

See also

* Click to see changes in V3

Dust Production (dry weight)

Table 7: Plant Sheet - Dust Production (dry weight)

Line Title Comment

022

Bypass dust leaving kiln system

Unit [t/yr, dry weight]
Type number input
Comment: Only bypass dust which leaves the kiln system, e.g. for landfilling.
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line037​

See also

023

CKD leaving the kiln system

Unit [t/yr, dry weight]
Type number input
Comment: All CKD which leaves the kiln system, e.g. for additions to cement mill, direct sale, landfilling, etc. CKD volumes added to cement mill should also be entered in line 17. CKD sold directly as a product may be entered in line 19b.
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line038a​

See also

024

CKD calcination rate d (Plant specific value or default 0%= dry kilns, 100%= for other kiln types)*

Unit [%]
Type number input
Comment: for other kiln types. To be replaced with more precise data by Company if available. See Protocol Guideance Document, Appendix 4 for instructions.
Comment: Please note that the value entered should be a percentage!
Validation: Validation Ranges for plant with kiln operation: 0 - 1
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line038a​

See also

* Click to see changes in V3

Kiln Fuel Consumption incl. raw material and fuel drying

Table 8: Plant Sheet - Kiln Fuel Consumption incl. raw material and fuel drying

Line Title Comment

025

Total heat consumption of kilns*

Unit [TJ/yr]
Type calculated
Comment: Sum of conventional fossil fuels, alternative fossil fuels, and biomass fuels; including fuels for drying of raw amterials and fuels
Formula: IF(COUNTBLANK( ​line026​ : ​line028​ )=3,"",SUM( ​line026​ : ​line028​ ))

Used in lines: ​line025a​ , ​line093​ , ​line094​ , ​line095​ , ​line096​ , ​line096a​ , ​line096b​ , ​line096c​ , ​line096d​

See also

025a

Total heat consumption of kilns excluding drying of fuels and raw materials*

Unit [TJ/yr]
Type calculated
Comment: Sum of conventional fossil fuels, alternative fossil fuels, and biomass fuels; excluding fuels for drying of raw amterials and fuels
Formula: IF(OR( ​line025​ ="", ​line184​ ="", ​line184g​ ="", ​line184i​ =""),"", ​line025​ - ​line184​ - ​line184g​ - ​line184i​ )

See also

026

Conventional fossil fuels

Unit [TJ/yr]
Type calculated
Comment: Calculated based on consumption of individual fuels and their lower heating values
Formula: IF(OR( ​line161​ ="", ​line184​ =""),"", ​line161​ + ​line184​ )

Used in lines: ​line025​ , ​line094​ , ​line096b​

See also

027

Alternative fuels, fossil content; excluding biomass fraction of mixed fuels*

Unit [TJ/yr]
Type calculated
Comment: Calculated based on consumption of individual fuels and their lower heating values
Formula: IF(OR( ​line168​ ="", ​line184g​ =""),"", ​line168​ + ​line184g​ )

Used in lines: ​line025​ , ​line095​ , ​line096c​

See also

028

Biomass fuels, incl. biomass content of alternative fuels*

Unit [TJ/yr]
Type calculated
Comment: Calculated based on consumption of individual fuels and their lower heating values
Formula: IF(OR( ​line175​ ="", ​line184i​ =""),"", ​line175​ + ​line184i​ )

Used in lines: ​line025​ , ​line096​ , ​line096d​

See also

* Click to see changes in V3

Non-Kiln Fuel Consumption

Table 9: Plant Sheet - Non-Kiln Fuel Consumption

Line Title Comment

030

Equipment and on-site vehicles

Unit [TJ/yr]
Type calculated
Comment: Fuel used for quarry equipment and vehicles for internal transport
Formula: ​line321​ + ​line321c​

Used in lines: ​line032​

See also

031a

Room heating and cooling

Unit [TJ/yr]
Type calculated
Comment: Fuel used for office heating
Formula: ​line322​

Used in lines: ​line032​

See also

031b

Drying of mineral components*

Unit [TJ/yr]
Type calculated
Comment: Fuel used for drying of mineral components
Formula: IF(OR( ​line323k​ ="", ​line323g​ ="", ​line323i​ =""),"", ​line323k​ + ​line323g​ + ​line323i​ )

Used in lines: ​line032​

See also

031c

On-site power generation

Unit [TJ/yr]
Type calculated
Comment: Fuel used for power generation on-site (autoproduction)
Formula: IF(OR( ​line324aa​ ="", ​line324f​ ="", ​line324h​ =""),"", ​line324aa​ + ​line324f​ + ​line324h​ )

Used in lines: ​line032​

See also

032

Total non-kiln fuel consumption

Unit [TJ/yr]
Type calculated
Formula: IF(COUNTBLANK( ​line030​ : ​line031c​ )=4,"",SUM( ​line030​ : ​line031c​ ))

See also

* Click to see changes in V3

Power Balance

Table 10: Plant Sheet - Power Balance

Line Title Comment

033a

Total power production from separate on-site power generation*

Unit [MWh/yr]
Type number input
Comment: Power production from separate on-site power generation in Mega Watt hours per year
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033ac​ , ​line033ad​

See also

033aa

Power delivered to cement plant*

Unit [MWh/yr]
Type number input
Comment: Power production from separate on-site power generation delivered to the cement plant in Mega Watt hours per year
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033ac​ , ​line033​

See also

033ab

Power delivered externally*

Unit [MWh/yr]
Type number input
Comment: Power production from separate on-site power generation delivered externally in Mega Watt hours per year
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033ac​

See also

033ac

Power consumed by on-site power generation equipment*

Unit [MWh/yr]
Type calculated
Comment: Power consumed in the power plant from separate on-site power generation in Mega Watt hours per year
Formula: IF(OR( ​line033a​ ="", ​line033aa​ ="", ​line033ab​ =""),"", ​line033a​ - ​line033aa​ - ​line033ab​ )

See also

033ad

CO2 per power unit produced by separate on-site power generation*

Unit [kg CO2/MWh]
Type calculated
Comment: CO2 emission factor of power produced by on-site power generation
Formula: IF( ​line033a​ =0,"", ​line045c​ / ​line033a​ *1000)

See also

033b

Total power production from waste heat recovery*

Unit [MWh/yr]
Type number input
Comment: Power production from waste heat recovery in Mega Watt hours per year
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033bc​

See also

033ba

Power delivered to cement plant*

Unit [MWh/yr]
Type number input
Comment: Power production from waste heat recovery delivered to the cement plant in Mega Watt hours per year
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033bc​ , ​line033​

See also

033bb

Power delivered externally*

Unit [MWh/yr]
Type number input
Comment: Power production from waste heat recovery delivered externally in Mega Watt hours per year
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033bc​

See also

033bc

Power consumed by waste heat recovery equipment*

Unit [MWh/yr]
Type calculated
Comment: Power consumed in the power plant from waste heat recovery in Mega Watt hours per year
Formula: IF(OR( ​line033b​ ="", ​line033ba​ ="", ​line033bb​ =""),"", ​line033b​ - ​line033ba​ - ​line033bb​ )

See also

033c

Total external power consumption for cement manufacturing*

Unit [MWh/yr]
Type calculated
Comment: Power consumption for cement manufacturing including power plant (own consumption) obtained from the external grid or supplier
Formula: IF(COUNTBLANK( ​line033ca​ : ​line033cc​ )=3,"",SUM( ​line033ca​ : ​line033cc​ ))

Used in lines: ​line049a​

See also

033ca

External power delivered to cement plant*

Unit [MWh/yr]
Type number input
Comment: purchased power minus power sold back in case of own power production.

Used in lines: ​line033c​ , ​line033​

See also

033cb

Cement-related external power delivered to on-site power generation plant*

Unit [MWh/yr]
Type number input
Comment: Power used for own consumption of on-site power plant obtained from the external grid or supplier
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033c​

See also

033cc

Cement-related external power delivered to waste heat recovery plant*

Unit [MWh/yr]
Type number input
Comment: Power used for own consumption of waste heat recovery plant obtained from the external grid or supplier
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line033c​

See also

033d

CO2 per power unit produced externally

Unit [kg CO2/MWh]
Type number input
Comment: Specific CO2 emission per unit grid power, to be obtained from power supplier or national authorities

Used in lines: ​line049a​

See also

033e

Power consumption up to and including clinker production*

Unit [MWh/yr]
Type number input
Comment: Power used for clinker production (e.g. from the quarry to the clinker storage)

Used in lines: ​line098​ , ​line098c​

See also

033

Total cement plant power consumption

Unit [MWh/yr]
Type calculated
Formula: IF(AND( ​line033aa​ =0, ​line033ba​ =0, ​line033ca​ =""),"", ​line033aa​ + ​line033ba​ + ​line033ca​ )

Used in lines: ​line097​ , ​line098c​

See also

* Click to see changes in V3

Waste Heat Use

Table 11: Plant Sheet - Waste Heat Use

Line Title Comment

034

Waste heat supplied to external consumers

Unit [GJ/yr]
Type number input
Comment: Waste heat exported to third parties
Default value: 0(You may put a more plant specific value here.)

See also

034a

Waste heat used internally (incl. power generation)*

Unit [GJ/yr]
Type number input
Comment: Waste heat used internally (e.g. for drying of fuels or raw materials)

See also

* Click to see changes in V3

Calculation method in calcination sheet

Table 12: Plant Sheet - Calculation method in calcination sheet

Line Title Comment

034d

Calculation method in calcination sheet*

Unit A1; A2; B1; B2
Type selection
Comment: Selected method for reporting CO2 emissions from raw material calcination
Formula: IF( ​line007n​ ="","", ​line007n​ )
Default value: B1

Used in lines: ​line035a​ , ​line035b​ , ​line035c​ , ​line035d​ , ​line036​ , ​line037​ , ​line038a​ , ​line038b​ , ​line039​

See also

* Click to see changes in V3

Data for Simple Output Method (A1)

Table 13: Plant Sheet - Data for Simple Output Method (A1)

Line Title Comment

034e

Input CalcA1: Raw meal consumption (Line 525)*

Unit [t/yr, dry weight]
Type number input
Comment: parameters for simple input method (A1)

Used in lines: ​line035d​

See also

034f

Input CalcA1: Total CO2 from raw materials (Line 526)*

Unit [t CO2/yr]
Type number input
Comment: parameters for simple input method (A1)

Used in lines: ​line039​

See also

* Click to see changes in V3

Data for Detailed Output Method (A2)

Table 14: Plant Sheet - Data for Detailed Output Method (A2)

Line Title Comment

034i

Input CalcA2: Raw meal consumption (Line 681)*

Unit [t/yr, dry weight]
Type number input
Comment: parameters for detailed input method (A2)

Used in lines: ​line035d​

See also

034j

Input CalcA2: Total CO2 from raw materials (Line 682)*

Unit [t CO2/yr]
Type number input
Comment: parameters for detailed input method (A2)

Used in lines: ​line039​

See also

* Click to see changes in V3

Data for Simple Input Method (B1)

Table 15: Plant Sheet - Data for Simple Input Method (B1)

Line Title Comment

034m

Standard calcination emission factor [default 525 kg CO2/t clinker]*

Unit [kg CO2/t cli]
Type number input
Comment: Standard parameter for simple output method (B1)
Default value: 525(You may put a more plant specific value here.)

Used in lines: ​line035a​

See also

034n

Organic carbon content of raw meal (average), default value 0.2%, or set plant specific value*

Unit [%, dry weight]
Type number input
Comment: Standard parameter for simple output method (B1)
Default value: 0.2%(You may put a more plant specific value here.)

Used in lines: ​line035b​

See also

034o

Raw meal : clinker ratio, default value 1.55, or set plant specific value*

Unit [--, dry weight]
Type number input
Comment: Standard parameter for simple output method (B1)
Default value: 1.55(You may put a more plant specific value here.)

Used in lines: ​line035c​

See also

* Click to see changes in V3

Data for Detailed Input Method (B2)

Table 16: Plant Sheet - Data for Detailed Input Method (B2)

Line Title Comment

034q

Input CalcB2: Calcination emission factor corrected for CaO,MgO, Ca-Si, Mg-Si imports (Line 820)*

Unit [kg CO2/t cli]
Type number input
Comment: parameter for detailed output method (B2)

Used in lines: ​line035a​

See also

034r

Organic carbon content of raw meal (average), default value 0.2%, or set plant specific value*

Unit [%, dry weight]
Type number input
Comment: Standard parameter for detailed output method (B2)
Comment: Please note that the input value should be in percentage!
Default value: 0.2%(You may put a more plant specific value here.)

Used in lines: ​line035b​

See also

034s

Raw meal : clinker ratio, default value 1.55, or set plant specific value*

Unit [--, dry weight]
Type number input
Comment: Standard parameter for detailed output method (B2)
Default value: 1.55(You may put a more plant specific value here.)

Used in lines: ​line035c​

See also

* Click to see changes in V3

CO2 from Raw Materials

Table 17: Plant Sheet - CO2 from Raw Materials

Line Title Comment

035a

Calcination emission factor, corrected for CaO- and MgO imports

Unit [kg CO2/t cli]
Type calculated
Comment: B1: Default set equal to 525 kg CO2/ t clinker. B2: To be replaced with more precise data by Company if available (see auxiliary sheet "CalcB2")
Validation: Validation Ranges for plant with kiln operation: 460 - 570
Formula: IF( ​line034d​ ="B2", ​line034q​ ,IF( ​line034d​ ="B1", ​line034m​ ,"n. appl."))

Used in lines: ​line036​ , ​line037​ , ​line038a​

See also

035b

Organic carbon content of raw meal (average)

Unit [%, dry weight]
Type calculated
Comment: B1, B2: Default set equal to 0.2%. To be replaced with company-specific data if raw materials with substantially higher or lower content of organic carbon are used. See Guidance document for details.
Formula: IF( ​line034d​ ="B1", ​line034n​ ,IF( ​line034d​ ="B2", ​line034r​ ,"n. appl."))

Used in lines: ​line038b​

See also

035c

Raw meal : clinker ratio

Unit [--, dry weight]
Type calculated
Comment: B1, B2: Default set equal to 1.55. To be replaced with company-specific data (excluding fuel ash content) if organic carbon in raw materials is of relevance. Any dust leaving the kiln system should be reflected in this ratio. Ash content of fuels should be excluded.
Formula: IF( ​line034d​ ="B1", ​line034o​ ,IF( ​line034d​ ="B2", ​line034s​ ,"n. appl."))

Used in lines: ​line035d​

See also

035d

Raw meal consumption

Unit [t/yr, dry weight]
Type calculated
Comment: A1, A2: Input from auxilary sheet "CalcA1", "CalcA2". B1, B2: Calculated from the raw meal : clinker ratio and the amount of clinker produced
Formula: IF( ​line034d​ ="A1", ​line034e​ ,IF( ​line034d​ ="A2", ​line034i​ ,IF( ​line008​ ="","", ​line008​ * ​line035c​ )))

Used in lines: ​line038b​

See also

036

CO2 from calcination of raw materials consumed for clinker production*

Unit [t CO2/yr]
Type calculated
Comment: B1, B2: Calculated from the calcination emission factor and the clinker production
Formula: IF(OR( ​line034d​ ="A1", ​line034d​ ="A2"),"n. appl.",IF( ​line008​ ="","", ​line035a​ /1000* ​line008​ ))

Used in lines: ​line039​

See also

037

CO2 from calcination of bypass dust leaving the kiln system

Unit [t CO2/yr]
Type calculated
Comment: B1, B2: Calculated from the calcination emission factor and the amount of bypass dust leaving the kiln system (e.g. for landfilling)
Formula: IF(OR( ​line034d​ ="A1", ​line034d​ ="A2"),"n. appl.",IF( ​line022​ ="","", ​line035a​ /1000* ​line022​ ))

Used in lines: ​line039​

See also

038a

CO2 from calcination of CKD leaving the kiln system

Unit [t CO2/yr]
Type calculated
Comment: B1, B2: Calculated from the calcination emission factor, the amount of CKD leaving the kiln system (e.g. for landfilling or sale), and the calcination rate of CKD
Formula: IF(OR( ​line034d​ ="A1", ​line034d​ ="A2"),"n. appl.",IF( ​line023​ ="","", ​line023​ * ​line035a​ /1000/(1+ ​line035a​ /1000)* ​line024​ /(1- ​line035a​ /1000/(1+ ​line035a​ /1000)* ​line024​ )))

Used in lines: ​line039​

See also

038b

CO2 from organic carbon content of raw meal

Unit [t CO2/yr]
Type calculated
Comment: B1, B2: Calculated from the organic carbon content of raw meal, the raw meal consumption, and the CO2 to C molar weight ratio
Formula: IF(OR( ​line034d​ ="A1", ​line034d​ ="A2"),"n. appl.",IF( ​line035d​ ="","", ​line035b​ * ​line035d​ *3.664))

Used in lines: ​line039​

See also

039

Total CO2 from raw materials

Unit [t CO2/yr]
Type calculated
Comment: A1, A2: Input from auxilary sheet "CalcA1", "CalcA2". B1, B2
Validation: Validation Ranges for plant with kiln operation: (n.a.) - (n.a.)
Formula: IF( ​line034d​ ="A1", ​line034f​ ,IF( ​line034d​ ="A2", ​line034j​ ,SUM( ​line036​ : ​line038b​ )))

Used in lines: ​line048​ , ​line059​ , ​line059a​

See also

* Click to see changes in V3

CO2 from Kiln Fuels (incl. drying of fuels and raw materials)

Table 18: Plant Sheet - CO2 from Kiln Fuels (incl. drying of fuels and raw materials)

Line Title Comment

040

CO2 from conventional fossil fuels

Unit [t CO2/yr]
Type calculated
Comment: Sum of CO2 emissions from conventional fossil fuels, including drying of fuels and raw materials
Formula: IF(OR( ​line211​ ="", ​line234​ =""),"", ​line211​ + ​line234​ )

Used in lines: ​line043​

See also

041

CO2 from alternative fossil fuels

Unit [t CO2/yr]
Type calculated
Comment: Sum of CO2 emissions from alternative fossil fuels, including drying of fuels and raw materials
Formula: IF(OR( ​line218​ ="", ​line235​ =""),"", ​line218​ + ​line235​ )

Used in lines: ​line043​ , ​line071​

See also

043

Total CO2 from fossil-based kiln fuels

Unit [t CO2/yr]
Type calculated
Formula: IF(COUNTBLANK( ​line040​ : ​line041​ )=2,"",SUM( ​line040​ : ​line041​ ))

Used in lines: ​line048​ , ​line059​ , ​line059b​ , ​line096a​

See also

* Click to see changes in V3

CO2 from Non-Kiln Fuels

Table 19: Plant Sheet - CO2 from Non-Kiln Fuels

Line Title Comment

044

CO2 from equipment and on-site vehicles (fossil fuels)

Unit [t CO2/yr]
Type calculated
Comment: Sum of CO2 emissions from equipment and on-site vehicles
Formula: ​line331​

Used in lines: ​line046​ , ​line059b​

See also

045a

CO2 from room heating and cooling (fossil fuels)

Unit [t CO2/yr]
Type calculated
Comment: Sum of CO2 emissions from room heating and cooling
Formula: ​line332​

Used in lines: ​line046​ , ​line059b​

See also

045b

CO2 from drying of mineral components (fossil fuels)*

Unit [t CO2/yr]
Type calculated
Comment: Sum of CO2 emissions from drying of mineral components
Formula: IF(OR( ​line333k​ ="", ​line333g​ =""),"", ​line333k​ + ​line333g​ )

Used in lines: ​line046​ , ​line059b​

See also

045c

CO2 from seperate on-site power generation (fossil fuels)

Unit [t CO2/yr]
Type calculated
Comment: Sum of CO2 emissions from on-site power generation (excl. biomass CO2)
Formula: IF(OR( ​line334aa​ ="", ​line334f​ =""),"", ​line334aa​ + ​line334f​ )

Used in lines: ​line033ad​ , ​line046​ , ​line059c​

See also

046

Total CO2 from non-kiln fossil fuels

Unit [t CO2/yr]
Type calculated
Formula: IF(COUNTBLANK( ​line044​ : ​line045c​ )=4,"",SUM( ​line044​ : ​line045c​ ))

Used in lines: ​line048​ , ​line059​

See also

* Click to see changes in V3

Total Direct CO2 Emissions

Table 20: Plant Sheet - Total Direct CO2 Emissions

Line Title Comment

048

Total direct CO2: all fossil CO2 sources

Unit [t CO2/yr]
Type calculated
Formula: IF(OR( ​line039​ ="", ​line043​ ="", ​line046​ =""),"", ​line039​ + ​line043​ + ​line046​ )

See also

* Click to see changes in V3

Indirect CO2 Emissions (Main Sources)

Table 21: Plant Sheet - Indirect CO2 Emissions (Main Sources)

Line Title Comment

049a

CO2 from external power generation

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line033c​ =0,"", ​line033c​ * ​line033d​ /1000)

Used in lines: ​line049d​ , ​line082c​ , ​line082a​

See also

049b

Emission factor for inbound clinker*

Unit [kg CO2/t cli]
Type number input
Comment: Default is 865 kg CO2/t clinker. This represents an average of several cement companies represented in CSI. Using this default consistently across different plants ensures that company-internal clinker transfers cancel out when consolidating emissions. The value of 865 kg CO2/t clinker in the Protocol version 3.0 is taken from the CSI GNR data base. It is the global weighted average for the years 2006/2007.
Comment: The value of 865 kg CO2/t clinker in the Protocol version 3.0 is taken from the CSI GNR data base. It is the global weighted average for the years 2006/2007.
Validation: Validation Ranges for plant with kiln operation: 865 - 865
Default value: 865(You may put a more plant specific value here.)

Used in lines: ​line049c​

See also

049c

CO2 from net inbound (+) / outbound (-) clinker*

Unit [t CO2/yr]
Type calculated
Comment: Calculated by multiplying net clinker imports (= clinker bought minus clinker sold, including clinker transfers) by the default emission factor for bought clinker and subtracting CO2 emissions from sold clinker. Value will be negative if plant is net exporter of clinker. ; =(((line9 + line10b + line10c) * line49b) - (line10 * line60)) / 1000.
Formula: IF(OR( ​line009​ ="", ​line010b​ ="", ​line010c​ ="", ​line010​ =""),"",IF( ​line060​ <>"n. appl.",((( ​line009​ + ​line010b​ + ​line010c​ )* ​line049b​ )-( ​line010​ * ​line060​ ))/1000,( ​line009​ + ​line010b​ + ​line010c​ )* ​line049b​ /1000))

Used in lines: ​line049d​ , ​line082b​

See also

049d

Total indirect CO2 (main sources)

Unit [t CO2/yr]
Type calculated
Formula: IF(OR( ​line049a​ ="", ​line049c​ =""),"", ​line049a​ + ​line049c​ )

See also

* Click to see changes in V3

Direct CO2 from Biomass Fuels (Memo Item)

Table 22: Plant Sheet - Direct CO2 from Biomass Fuels (Memo Item)

Line Title Comment

050

CO2 from combustion of biomass (kiln and non-kiln fuels, incl. biomass content of mixed fuels)

Unit [t CO2/yr]
Type calculated
Comment: Direct CO2 emissions from combustion of kiln and non-kiln biomass fuels and biomass content of mixed fuels
Validation: Validation Ranges for plant with kiln operation: 0 - (n.a.) ; Validation Ranges for grinding centre:0 - 0
Formula: IF(OR( ​line225​ ="", ​line236​ ="", ​line331c​ ="", ​line333i​ ="", ​line334h​ =""),"", ​line225​ + ​line236​ + ​line331c​ + ​line333i​ + ​line334h​ )

Used in lines: ​line083a​

See also

* Click to see changes in V3

Gross CO2 Emissions (= total direct CO2; all sources), excluding CO2 from onsite power generation

Table 23: Plant Sheet - Gross CO2 Emissions (= total direct CO2; all sources), excluding CO2 from onsite power generation

Line Title Comment

059

Absolute gross CO2 including CO2 from on-site power generation*

This line is marked as KPI.

Unit [t CO2/yr]
Type calculated
Comment: Total direct emissions from raw materials, kiln fuels and non-kiln fuels
Validation: Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 19,824
Formula: IF(OR( ​line039​ ="", ​line043​ ="", ​line046​ =""),"", ​line039​ + ​line043​ + ​line046​ )

Used in lines: ​line059c​

See also

059c

Absolute gross CO2*

This line is marked as KPI.

Unit [t CO2/yr]
Type calculated
Comment: Total direct emissions from raw materials, kiln fuels and non-kiln fuels; excluding CO2 from on-site power generation ;
Formula: IF(OR( ​line059​ ="", ​line045c​ =""),"", ​line059​ - ​line045c​ )

Used in lines: ​line071​ , ​line060​ , ​line063​ , ​line062​

See also

059a

calcination component*

This line is marked as KPI.

Unit [t CO2/yr]
Type calculated
Comment: Direct emissions from raw materials; ;
Formula: ​line039​

Used in lines: ​line060a​ , ​line063a​ , ​line062a​

See also

059b

fuel component*

This line is marked as KPI.

Unit [t CO2/yr]
Type calculated
Comment: Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation
Formula: IF(OR( ​line043​ ="", ​line044​ ="", ​line045a​ ="", ​line045b​ =""),"", ​line043​ + ​line044​ + ​line045a​ + ​line045b​ )

Used in lines: ​line060b​ , ​line063b​ , ​line062b​

See also

071

Absolute net CO2*

This line is marked as KPI.

Unit [t CO2/yr]
Type calculated
Comment: Total direct emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, minus alternative fossil fuels
Validation: Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 703.36
Formula: IF(OR( ​line059c​ ="", ​line041​ =""),"", ​line059c​ - ​line041​ )

Used in lines: ​line073​ , ​line075​ , ​line074​

See also

083a

Absolute CO2 from biomass sources (including biomass content of mixed fuels)*

This line is marked as KPI.

Unit [t CO2/yr]
Type calculated
Validation: Validation Ranges for plant with kiln operation: 0 - 2,000,000
Formula: ​line050​

See also

* Click to see changes in V3

Specific Gross and Net CO2 Emissions per Clinker Produced

Table 24: Plant Sheet - Specific Gross and Net CO2 Emissions per Clinker Produced

Line Title Comment

060

Specific gross CO2 per tonne of clinker produced*

This line is marked as KPI.

Unit [kg CO2/t cli]
Type calculated
Comment: Total direct emissions, excluding CO2 from on-site power generation, divided by own clinker production
Validation: Validation Ranges for plant with kiln operation: 475 - 1,600
Formula: IF( ​line008​ ="","",IF( ​line008​ =0,"n. appl.", ​line059c​ / ​line008​ *1000))

Used in lines: ​line049c​

See also

060a

calcination component*

This line is marked as KPI.

Unit [kg CO2/t cli]
Type calculated
Comment: Direct emissions from raw materials, divided by own clinker production
Formula: IF( ​line008​ ="","",IF( ​line008​ =0,"n. appl.", ​line059a​ / ​line008​ *1000))

See also

060b

fuel component*

This line is marked as KPI.

Unit [kg CO2/t cli]
Type calculated
Comment: Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own clinker production
Formula: IF( ​line008​ ="","",IF( ​line008​ =0,"n. appl.", ​line059b​ / ​line008​ *1000))

See also

073

Specific net CO2 per tonne of clinker produced*

This line is marked as KPI.

Unit [kg CO2/t cli]
Type calculated
Comment: Net emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own clinker production
Validation: Validation Ranges for plant with kiln operation: 475 - 1,600
Formula: IF( ​line008​ ="","",IF( ​line008​ =0,"n. appl.", ​line071​ / ​line008​ *1000))

See also

* Click to see changes in V3

Specific Gross and Net CO2 Emissions per Cement (equivalent)

Table 25: Plant Sheet - Specific Gross and Net CO2 Emissions per Cement (equivalent)

Line Title Comment

063

Specific gross CO2per tonne of cement (eq.)*

This line is marked as KPI.

Unit [kg CO2/t cem eq.]
Type calculated
Comment: Total direct emissions, excluding CO2 from on-site power generation, divided by total cement (equivalent)
Formula: IF(OR( ​line059c​ ="", ​line021b​ ="n. appl."),"n. appl.", ​line059c​ / ​line021b​ *1000)

See also

063a

calcination component*

This line is marked as KPI.

Unit [kg CO2/t cem eq.]
Type calculated
Comment: Direct emissions from raw materials, divided by total cement (equivalent)
Formula: IF( ​line008​ ="","",IF(OR( ​line008​ =0, ​line011​ =0),"n. appl.", ​line059a​ / ​line021b​ *1000))

See also

063b

fuel component*

This line is marked as KPI.

Unit [kg CO2/t cem eq.]
Type calculated
Comment: Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by total cement (equivalent)
Formula: IF( ​line008​ ="","",IF(OR( ​line008​ =0, ​line011​ =0),"n. appl.", ​line059b​ / ​line021b​ *1000))

See also

075

Specific net CO2 per tonne of cement (eq.)*

This line is marked as KPI.

Unit [kg CO2/t cem eq.]
Type calculated
Comment: Net emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own production of cement (equivalent)
Validation: Validation Ranges for plant with kiln operation: 438.51 - 1,477
Formula: IF(OR( ​line021b​ ="n. appl.", ​line021b​ =0),"n. appl.", ​line071​ / ​line021b​ *1000)

See also

* Click to see changes in V3

Specific Gross and Net CO2 Emissions per Cementitious Produced

Table 26: Plant Sheet - Specific Gross and Net CO2 Emissions per Cementitious Produced

Line Title Comment

062

Specific gross CO2 per tonne of cementitious product*

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Comment: Total direct emissions, excluding CO2 from on-site power generation, divided by own production of cementitious products (excluding bought clinker in cement)
Validation: Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 300
Formula: IF( ​line021a​ ="","",IF( ​line021a​ =0,"n. appl.", ​line059c​ / ​line021a​ *1000))

See also

062a

calcination component

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Comment: Direct emissions from raw material calcination, divided by own production of cementitious products
Formula: IF( ​line021a​ ="","",IF( ​line021a​ =0,"n. appl.", ​line059a​ / ​line021a​ *1000))

See also

062b

fuel component*

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Comment: Direct emissions from kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own production of cementitious products
Formula: IF( ​line021a​ ="","",IF( ​line021a​ =0,"n. appl.", ​line059b​ / ​line021a​ *1000))

See also

074

Specific net CO2 per tonne of cementitious product*

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Comment: Net emissions from raw materials, kiln fuels and non-kiln fuels, excluding CO2 from on-site power generation, divided by own production of cementitious products
Validation: Validation Ranges for plant with kiln operation: (n.a.) - (n.a.) ; Validation Ranges for grinding centre:0 - 300
Formula: IF( ​line021a​ ="","",IF( ​line021a​ =0,"n. appl.", ​line071​ / ​line021a​ *1000))

Used in lines: ​line077​

See also

077

Improvement rate - net CO2 per tonne of cementitious product*

This line is marked as KPI.

Unit [% relative to base yr]
Type calculated
Comment: Reduction of specific emissions relative to base year (default 1990)
Formula: IF( ​line074​ ="","",IF(OR( ​line074​ ="n. appl.", ​line074​ =0),"n. appl.",( ​line074​ - ​line074​ )/ ​line074​ ))

See also

* Click to see changes in V3

Specific CO2 from Indirect and Biomass Sources

Table 27: Plant Sheet - Specific CO2 from Indirect and Biomass Sources

Line Title Comment

082c

Specific indirect CO2 from external power generation per tonne of cement (eq.)*

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Formula: IF(OR( ​line021b​ ="n. appl.", ​line021b​ =0),"n. appl.", ​line049a​ / ​line021b​ *1000)

See also

082a

Specific indirect CO2 from external power generation per tonne of cementitious product

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Formula: IF( ​line021a​ ="","",IF( ​line021a​ =0,"n. appl.", ​line049a​ / ​line021a​ *1000))

See also

082b

Specific indirect CO2 from net clinker imports (+) / exports (-) per tonne of cementitious product

This line is marked as KPI.

Unit [kg CO2/t cem prod]
Type calculated
Formula: IF( ​line021a​ ="","",IF( ​line021a​ =0,"n. appl.", ​line049c​ / ​line021a​ *1000))

See also

* Click to see changes in V3

General Performance Indicators

Table 28: Plant Sheet - General Performance Indicators

Line Title Comment

091

Net outbound clinker per net clinker consumption*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: percentage of direct clinker sales versus clinker consumed to produce cement
Formula: IF( ​line011​ ="","",IF( ​line011​ =0,"n. appl.",( ​line010​ - ​line009​ - ​line010b​ - ​line010c​ )/ ​line011​ ))

See also

092a

Clinker/cement (eq.) factor**

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Calculated based on total clinker consumed and total Portland + Blended cements
Comment: This value is an important indicator for your production. It presents the ratio of the clinker in the cement produced. The output value is in percentage.
Comment: * Clinker/cement (eq.) factor The clinker/cement (eq.) factor is defined as: Total clinker consumed / (own clinker consumed plus gypsum, lime stone, CKD plus clinker substitute consumed for blending plus clinker bought and consumed). Definition of clinker/cement (eq.) factor as in Protocol Guidance Document Version 3, Section 6.3. The factor is based on clinker consumption. Hence, in the denominator sold clinker is excluded and bought clinker is included. Cement substitutes are excluded. See also the equation for its calculation in the comment sheet.
Validation: Validation Ranges for plant with kiln operation: 0 - .970; Validation Ranges for grinding centre:0 - .970
Formula: IF(OR( ​line011​ ="", ​line020​ ="", ​line011​ =0, ​line020​ =0),"n. appl.", ​line011​ / ​line020​ )

Used in lines: ​line021b​

See also

092

Clinker/cementitious factor*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Total clinker consumed divided by the total of cements produced
Comment: * Clinker/cementitious factor Definition of clinker / cementitious factor as in Protocol Guidance Document Version 3, Section 6.3. The factor is based on clinker consumption. Hence, in the denominator sold clinker is excluded and bought clinker is included. Furthermore, cement substitutes are included. See also the equation for its calculation in the comment sheet.
Validation: Validation Ranges for plant with kiln operation: 0 - .970; Validation Ranges for grinding centre:0 - .970
Formula: IF( ​line021​ ="","",IF( ​line021​ =0,"n. appl.", ​line011​ / ​line021​ ))

Used in lines: ​line098c​

See also

093

Specific heat consumption of clinker production*

This line is marked as KPI.

Unit [MJ/t cli]
Type calculated
Comment: Total heat consumption of kilns divided by the clinker production
Validation: Validation Ranges for plant with kiln operation: 2,800 - 9,000
Formula: IF( ​line008​ ="","",IF( ​line008​ =0,"n. appl.", ​line025​ *10^6/ ​line008​ ))

Used in lines: ​line098b​

See also

094

Conventional fossil fuel rate (kiln fuels)*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Consumption of conventional fossil fuels divided by the total heat consumption of kilns
Formula: IF( ​line025​ ="","",IF( ​line025​ =0,"n. appl.", ​line026​ / ​line025​ ))

See also

095

Alternative fossil fuel rate (kiln fuels)*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Consumption of alternative fossil fuels divided by the total heat consumption of kilns
Validation: Validation Ranges for plant with kiln operation: 0 - 1; Validation Ranges for grinding centre:0 - 1
Formula: IF( ​line025​ ="","",IF( ​line025​ =0,"n. appl.", ​line027​ / ​line025​ ))

See also

096

Biomass fuel rate (kiln fuels)*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Consumption of biomass fuels divided by the total heat consumption of kilns
Validation: Validation Ranges for plant with kiln operation: 0 - 1; Validation Ranges for grinding centre:0 - 1
Formula: IF( ​line025​ ="","",IF( ​line025​ =0,"n. appl.", ​line028​ / ​line025​ ))

See also

096a

CO2 emission factor for kiln fuel mix*

This line is marked as KPI.

Unit [t CO2/GJ]
Type calculated
Comment: Total CO2 from fossil-based kiln fuels divided by total heat consumption of kilns
Formula: IF( ​line043​ ="","",IF( ​line043​ =0,"n. appl.", ​line043​ / ​line025​ ))

See also

096b

Total conventional fossil fuel rate at plant level*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Total conventional fossil fuel energy used in the whole plant divided by total fuel energy use in %
Formula: IF(AND( ​line025​ =0, ​line321​ =0, ​line321c​ =0, ​line322​ =0, ​line323k​ =0, ​line323g​ =0, ​line323i​ =0, ​line324aa​ =0, ​line324f​ =0, ​line324h​ =0),"n. appl.",( ​line026​ + ​line321​ +( ​line321c​ *(1- ​line200g​ ))+ ​line322​ + ​line323k​ + ​line324aa​ )/( ​line025​ + ​line321​ + ​line321c​ + ​line322​ + ​line323k​ + ​line323g​ + ​line323i​ + ​line324aa​ + ​line324f​ + ​line324h​ ))

See also

096c

Total alternative fossil fuel rate at plant level*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Total alternative fossil fuel energy used in the whole plant divided by total fuel energy use in %
Formula: IF(AND( ​line025​ =0, ​line321​ =0, ​line321c​ =0, ​line322​ =0, ​line323k​ =0, ​line323g​ =0, ​line323i​ =0, ​line324aa​ =0, ​line324f​ =0, ​line324h​ =0),"n. appl.",( ​line027​ + ​line323g​ + ​line324f​ )/( ​line025​ + ​line321​ + ​line321c​ + ​line322​ + ​line323k​ + ​line323g​ + ​line323i​ + ​line324aa​ + ​line324f​ + ​line324h​ ))

See also

096d

Total biomass fuel rate at plant level*

This line is marked as KPI.

Unit [%]
Type calculated
Comment: Total biomass fuel energy used in the whole plant divided by total fuel energy use in %
Formula: IF(AND( ​line025​ =0, ​line321​ =0, ​line321c​ =0, ​line322​ =0, ​line323k​ =0, ​line323g​ =0, ​line323i​ =0, ​line324aa​ =0, ​line324f​ =0, ​line324h​ =0),"n. appl.",( ​line028​ +( ​line321c​ * ​line200g​ )+ ​line323i​ + ​line324h​ )/( ​line025​ + ​line321​ + ​line321c​ + ​line322​ + ​line323k​ + ​line323g​ + ​line323i​ + ​line324aa​ + ​line324f​ + ​line324h​ ))

See also

097

Specific total power consumption*

This line is marked as KPI.

Unit [kWh/t cement]
Type calculated
Comment: Total plant power consumption divided by total cements and substitutes produced
Comment: * In this KPI the total power consumption is related to the processing of cementitous products. Hence, it is referenced to cements and substitutes produced. In the denominator sold clinker is excluded and bought clinker is included. See also the equation for its calculation in the comment sheet. Note: The reference is different from the definition, which is used to report specific CO2 emissions per ton of cementitous product in the Protocol Guidance Document Version 3, Section 6.2.
Validation: Validation Ranges for plant with kiln operation: 80 - 250; Validation Ranges for grinding centre:30 - 120
Formula: IF( ​line021​ ="","",IF( ​line021​ =0,"n. appl.", ​line033​ / ​line021​ *1000))

See also

098

Specific power consumption of clinker production*

This line is marked as KPI.

Unit [kWh/t clinker]
Type calculated
Comment: Power consumption up to and including clinker production divided by clinker production
Formula: IF( ​line008​ ="","",IF( ​line008​ =0,"n. appl.", ​line033e​ / ​line008​ *1000))

Used in lines: ​line098c​ , ​line098b​

See also

098c

Specific power consumption of cement production**

This line is marked as KPI.

Unit [kWh/t cement]
Type calculated
Comment: Power consumption of cement production incl. power consumption of production of clinker consumed divided by cement and substitute production
Comment: * In this KPI the power consumption of cement production is related to the processing of cementitous products. Hence, it is referenced to cements and substitutes produced. In the denominator sold clinker is excluded and bought clinker is included. See also the equation for its calculation in the comment sheet. Note: The reference is different from the definition, which is used to report specific CO2 emissions per ton of cementitous product in the Protocol Guidance Document Version 3, Section 6.2.
Formula: IF(OR( ​line021​ ="", ​line021​ =0),"n. appl.",IF( ​line098​ <>"n. appl.",( ​line098​ * ​line092​ )+( ​line033​ - ​line033e​ )*1000/ ​line021​ ,( ​line033​ - ​line033e​ )*1000/ ​line021​ ))

See also

098a

National energy conversion factor*

This line is marked as KPI.

Unit [MJ/kWh]
Type calculated
Comment: Optional parameter

Used in lines: ​line098b​

See also

098b

Total energy intensity of clinker production (fuel and power)*

This line is marked as KPI.

Unit [MJ/t cli]
Type calculated
Comment: Optional result
Formula: IF( ​line098a​ <>"", ​line098​ * ​line098a​ + ​line093​ ,"")

See also

* Click to see changes in V3

Kiln Fuel Consumption in tonnes per year

Table 29: Plant Sheet - Kiln Fuel Consumption in tonnes per year

Line Title Comment

101

Conventional fossil fuels (excl. drying of raw materials and fuels)

This table lists the consumption of conventional fossil fuels in tonnes per year, excluding fuels for drying of raw materials and fuels. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

102

coal + anthracite

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line162​

See also

103

petrol coke

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line163​

See also

104

(ultra) heavy fuel

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line164​

See also

105

diesel oil

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line165​

See also

106

natural gas

Unit [1'000 Nm3/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line166​

See also

107

shale

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line167​

See also

107a

lignite

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 300,000; Validation Ranges for grinding centre:0 - 300,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line167a​

See also

 

108

Alternative fossil and mixed fuels (excl. drying of raw materials and fuels)*

This table lists the consumption of alternative fossil fuels in tonnes per year, excluding fuels for drying of raw materials and fuels. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

109

waste oil

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line169​ , ​line183a​ , ​line233a​

See also

110

tyres

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line170​ , ​line183a​ , ​line233a​

See also

111

RDF including plastics*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line171​ , ​line183a​ , ​line233a​

See also

112

solvents

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line172​ , ​line183a​ , ​line233a​

See also

113

impregnated saw dust

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line173​ , ​line183a​ , ​line233a​

See also

113a

mixed industrial waste

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line173a​ , ​line183a​ , ​line233a​

See also

114

other fossil based wastes and mixed fuels

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line174​ , ​line183a​ , ​line233a​

See also

 

115

Biomass fuels (excl. drying of raw materials and fuels)*

This table lists the consumption of alternative fossil fuels in tonnes per year, excluding fuels for drying of raw materials and fuels. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

116

dried sewage sludge

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line176​

See also

117

wood, non impregnated saw dust

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line177​

See also

118

paper, carton

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line178​

See also

119

animal meal

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line179​

See also

120

animal bone meal

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line180​

See also

121

animal fat

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line181​

See also

122

agricultural, organic, diaper waste, charcoal

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line182​

See also

123

other biomass

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line183​

See also

* Click to see changes in V3

Drying of raw materials and fuels

Table 30: Plant Sheet - Drying of raw materials and fuels

Line Title Comment

124

Conventional fossil fuels*

This table lists the consumption of conventional fossil fuels for drying of raw materials and fuels in tonnes per year. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

124a

coal + anthracite + lignite*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184a​

See also

124b

petrol coke*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184b​

See also

124c

(ultra) heavy fuel*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184c​

See also

124d

diesel oil*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184d​

See also

124e

natural gas*

Unit [1'000 Nm3/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184e​

See also

124f

shale*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184f​

See also

 

125a

other fossil based wastes and mixed fuels*

Unit [t/yr]
Type number input
Comment: Consumption of alternative fossil fuels for drying of raw materials and fuels in tonnes per year. Fuel types are clustered for reasons of simplicity.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184h​ , ​line184j​ , ​line236a​

See also

126a

other biomass*

Unit [t/yr]
Type number input
Comment: Consumption of biomass fuels for drying of raw materials and fuels in tonnes per year. Fuel types are clustered for reasons of simplicity.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184j​ , ​line236a​

See also

* Click to see changes in V3

Fuel Lower Heating Values

Table 31: Plant Sheet - Fuel Lower Heating Values

Line Title Comment
Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).

132

coal + anthracite

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 5 - 40; Validation Ranges for grinding centre:5 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line162​

See also

133

petrol coke

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 30 - 45; Validation Ranges for grinding centre:30 - 45
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line163​

See also

134

(ultra) heavy fuel

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line164​

See also

135

diesel oil

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line165​

See also

136

natural gas

Unit [GJ/1'000 Nm3]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line166​

See also

137

shale

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line167​

See also

137a

lignite

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line167a​

See also

Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).

139

waste oil

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line169​ , ​line183a​ , ​line233a​

See also

140

tyres

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line170​ , ​line183a​ , ​line233a​

See also

141

RDF including plastics*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line171​ , ​line183a​ , ​line233a​

See also

142

solvents

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line172​ , ​line183a​ , ​line233a​

See also

143

impregnated saw dust

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line173​ , ​line183a​ , ​line233a​

See also

143a

mixed industrial waste

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line173a​ , ​line183a​ , ​line233a​

See also

144

other fossil based wastes and mixed fuels

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line174​ , ​line183a​ , ​line233a​

See also

Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).

146

sewage sludge*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line176​

See also

147

wood, non impregnated saw dust*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line177​

See also

148

paper, carton*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line178​

See also

149

animal meal*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line179​

See also

150

animal bone meal*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line180​

See also

151

animal fat*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line181​

See also

152

agricultural, organic, diaper waste, charcoal*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line182​

See also

153

other biomass

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line183​

See also

* Click to see changes in V3

Drying of raw materials and fuels

Table 32: Plant Sheet - Drying of raw materials and fuels

Line Title Comment

154

Conventional fossil fuels*

Average lower heating value (= net calorific value) of fuels, expressed in GJ per t of consumed fuel. Default lower heating values are taken from the lines 132-137a (fuel lower heating values of conventional fossil fuels). Enter more specific lower heating values for this fuel if available.

154a

coal + anthracite + lignite*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line132 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 5 - 40; Validation Ranges for grinding centre:5 - 40
Formula: ​line132​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184a​

See also

154b

petrol coke*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line133 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 30 - 45; Validation Ranges for grinding centre:30 - 45
Formula: ​line133​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184b​

See also

154c

(ultra) heavy fuel*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line134 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Formula: ​line134​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184c​

See also

154d

diesel oil*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line135 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Formula: ​line135​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184d​

See also

154e

natural gas*

Unit [GJ/1'000 Nm3]
Type number input
Instruction: This line is per default referenced to the lower heating value in line136 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Formula: ​line136​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184e​

See also

154f

shale*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line137 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Formula: ​line137​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184f​

See also

 

155a

other fossil based wastes and mixed fuels*

Unit [GJ/t]
Type number input
Comment: Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184h​ , ​line184j​ , ​line236a​

See also

156a

other biomass*

Unit [GJ/t]
Type number input
Comment: Average lower heating value (= net calorific value) of fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 101-123 (for example, based on dry weight).
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line184j​ , ​line236a​

See also

* Click to see changes in V3

Kiln Fuel Consumption in terajoules (TJ) per year

Table 33: Plant Sheet - Kiln Fuel Consumption in terajoules (TJ) per year

Line Title Comment

161

Conventional fossil fuels

Unit [TJ/yr]
Type calculated
Comment: This is the total heat consumption of all conventional fossil kiln fuels. This result is registered in line 26 above
Formula: IF(COUNTBLANK( ​line162​ : ​line167a​ )=7,"",SUM( ​line162​ : ​line167a​ ))

Used in lines: ​line026​

See also

Heat consumption of conventional fossil kiln fuels, calculated from the amount of each fuel and their lower heating values

162

coal + anthracite

Unit [TJ/yr]
Type calculated
Formula: IF( ​line102​ ="","", ​line102​ * ​line132​ /1000)

Used in lines: ​line161​ , ​line212​

See also

163

petrol coke

Unit [TJ/yr]
Type calculated
Formula: IF( ​line103​ ="","", ​line103​ * ​line133​ /1000)

Used in lines: ​line161​ , ​line213​

See also

164

(ultra) heavy fuel

Unit [TJ/yr]
Type calculated
Formula: IF( ​line104​ ="","", ​line104​ * ​line134​ /1000)

Used in lines: ​line161​ , ​line214​

See also

165

diesel oil

Unit [TJ/yr]
Type calculated
Formula: IF( ​line105​ ="","", ​line105​ * ​line135​ /1000)

Used in lines: ​line161​ , ​line215​

See also

166

natural gas

Unit [TJ/yr]
Type calculated
Formula: IF( ​line106​ ="","", ​line106​ * ​line136​ /1000)

Used in lines: ​line161​ , ​line216​

See also

167

shale

Unit [TJ/yr]
Type calculated
Formula: IF( ​line107​ ="","", ​line107​ * ​line137​ /1000)

Used in lines: ​line161​ , ​line217​

See also

167a

lignite

Unit [TJ/yr]
Type calculated
Formula: IF( ​line107a​ ="","", ​line107a​ * ​line137a​ /1000)

Used in lines: ​line161​ , ​line217a​

See also

 

168

Alternative fossil and mixed fuels, excluding biomass fraction of mixed fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the total heat consumption of all alternative fossil kiln fuels. This result is registered in line 27 above
Formula: IF(COUNTBLANK( ​line169​ : ​line174​ )=7,"",SUM( ​line169​ : ​line174​ ))

Used in lines: ​line027​

See also

Heat consumption of alternative fossil kiln fuels, calculated from the amount of each fuel and their lower heating values

169

waste oil*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line109​ ="","", ​line109​ *( ​line139​ /1000)*(1- ​line200a​ ))

Used in lines: ​line168​ , ​line219​

See also

170

tyres*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line110​ ="","", ​line110​ *( ​line140​ /1000)*(1- ​line200b​ ))

Used in lines: ​line168​ , ​line220​

See also

171

RDF including plastics*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line111​ ="","", ​line111​ *( ​line141​ /1000)*(1- ​line200c​ ))

Used in lines: ​line168​ , ​line221​

See also

172

solvents*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line112​ ="","", ​line112​ *( ​line142​ /1000)*(1- ​line200d​ ))

Used in lines: ​line168​ , ​line222​

See also

173

impregnated saw dust*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line113​ ="","", ​line113​ *( ​line143​ /1000)*(1- ​line200e​ ))

Used in lines: ​line168​ , ​line223​

See also

173a

mixed industrial waste*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line113a​ ="","", ​line113a​ *( ​line143a​ /1000)*(1- ​line200f​ ))

Used in lines: ​line168​ , ​line223a​

See also

174

other fossil based wastes (excl. biomass content of mixed fuels)*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line114​ ="","", ​line114​ *( ​line144​ /1000)*(1- ​line200h​ ))

Used in lines: ​line168​ , ​line224​

See also

 

175

Biomass fuels - total, incl. biomass cont. from alternative fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the total heat consumption of all biomass kiln fuels. This result is registered in line 28 above
Formula: IF(COUNTBLANK( ​line176​ : ​line183a​ )=9,"",SUM( ​line176​ : ​line183a​ ))

Used in lines: ​line028​

See also

Heat consumption of biomass kiln fuels, calculated from the amount of each fuel and their lower heating values

176

sewage sludge

Unit [TJ/yr]
Type calculated
Formula: IF( ​line116​ ="","", ​line116​ * ​line146​ /1000)

Used in lines: ​line175​ , ​line226​

See also

177

wood, non impregnated saw dust

Unit [TJ/yr]
Type calculated
Formula: IF( ​line117​ ="","", ​line117​ * ​line147​ /1000)

Used in lines: ​line175​ , ​line227​

See also

178

paper, carton

Unit [TJ/yr]
Type calculated
Formula: IF( ​line118​ ="","", ​line118​ * ​line148​ /1000)

Used in lines: ​line175​ , ​line228​

See also

179

animal meal

Unit [TJ/yr]
Type calculated
Formula: IF( ​line119​ ="","", ​line119​ * ​line149​ /1000)

Used in lines: ​line175​ , ​line229​

See also

180

animal bone meal

Unit [TJ/yr]
Type calculated
Formula: IF( ​line120​ ="","", ​line120​ * ​line150​ /1000)

Used in lines: ​line175​ , ​line230​

See also

181

animal fat

Unit [TJ/yr]
Type calculated
Formula: IF( ​line121​ ="","", ​line121​ * ​line151​ /1000)

Used in lines: ​line175​ , ​line231​

See also

182

agricultural, organic, diaper waste, charcoal

Unit [TJ/yr]
Type calculated
Formula: IF( ​line122​ ="","", ​line122​ * ​line152​ /1000)

Used in lines: ​line175​ , ​line232​

See also

183

other biomass

Unit [TJ/yr]
Type calculated
Formula: IF( ​line123​ ="","", ​line123​ * ​line153​ /1000)

Used in lines: ​line175​ , ​line233​

See also

183a

biomass content from alternative fuels*

Unit [TJ/yr]
Type calculated
Formula: ( ​line109​ * ​line139​ * ​line200a​ + ​line110​ * ​line140​ * ​line200b​ + ​line111​ * ​line141​ * ​line200c​ + ​line112​ * ​line142​ * ​line200d​ + ​line113​ * ​line143​ * ​line200e​ + ​line113a​ * ​line143a​ * ​line200f​ + ​line114​ * ​line144​ * ​line200h​ )/1000

Used in lines: ​line175​

See also

* Click to see changes in V3

Drying of raw materials and fuels

Table 34: Plant Sheet - Drying of raw materials and fuels

Line Title Comment

184

Conventional fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the total heat consumption of all conventional fossil fuels for drying of raw materials and fuels. This result is registered in line 25a and line 26 above
Formula: IF(COUNTBLANK( ​line184a​ : ​line184f​ )=6,"",SUM( ​line184a​ : ​line184f​ ))

Used in lines: ​line025a​ , ​line026​

See also

Heat consumption of conventional fossil fuels for drying of raw materials and fuels, calculated from the amount of each fuel and their lower heating values

184a

coal + anthracite + lignite*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line124a​ ="","", ​line124a​ * ​line154a​ /1000)

Used in lines: ​line184​ , ​line234a​

See also

184b

petrol coke*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line124b​ ="","", ​line124b​ * ​line154b​ /1000)

Used in lines: ​line184​ , ​line234b​

See also

184c

(ultra) heavy fuel*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line124c​ ="","", ​line124c​ * ​line154c​ /1000)

Used in lines: ​line184​ , ​line234c​

See also

184d

diesel oil*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line124d​ ="","", ​line124d​ * ​line154d​ /1000)

Used in lines: ​line184​ , ​line234d​

See also

184e

natural gas*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line124e​ ="","", ​line124e​ * ​line154e​ /1000)

Used in lines: ​line184​ , ​line234e​

See also

184f

shale*

Unit [TJ/yr]
Type calculated
Formula: IF( ​line124f​ ="","", ​line124f​ * ​line154f​ /1000)

Used in lines: ​line184​ , ​line234f​

See also

 

184g

Alternative fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the total heat consumption of all alternative fossil fuels for drying of raw materials and fuels. This result is registered in line 25a line 27 above
Formula: ​line184h​

Used in lines: ​line025a​ , ​line027​

See also

184h

other fossil based wastes (excl. biomass content of mixed fuels)*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption of alternative fossil fuels, for drying of raw materials and fuels, calculated from the amount of each fuel and their lower heating values
Formula: IF( ​line125a​ ="","", ​line125a​ *( ​line155a​ /1000)*(1- ​line200h​ ))

Used in lines: ​line184g​ , ​line235a​

See also

184i

Alternative biomass fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the total heat consumption of all biomass fuels, for drying of raw materials and fuels. This result is registered in line 25a and line 28 above
Formula: ​line184j​

Used in lines: ​line025a​ , ​line028​

See also

184j

other biomass (incl. biomass content of mixed fuels)*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption of biomass fuels, for drying of raw materials and fuels, calculated from the amount of each fuel and their lower heating values
Formula: IF( ​line126a​ ="","",( ​line126a​ * ​line156a​ /1000)+( ​line125a​ * ​line155a​ /1000* ​line200h​ ))

Used in lines: ​line184i​ , ​line236a​

See also

* Click to see changes in V3

CO2 emission factors of Kiln Fuels (per lower heating value)

Table 35: Plant Sheet - CO2 emission factors of Kiln Fuels (per lower heating value)

Line Title Comment
CO2 emission factors of fuels, expressed in kg CO2 per GJ lower heating value (net calorific value). Default emission factors are taken from Worksheet "Fuel CO2 Factors". Enter plant- or company-specific emission factors if available

186

coal + anthracite

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​96​ (You may put a more plant specific value here.)

Used in lines: ​line212​ , ​line234a​ , ​line333a​ , ​line334a​

See also

187

petrol coke

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Formula: ​92,8​
Default value: 93(You may put a more plant specific value here.)

Used in lines: ​line213​ , ​line234b​ , ​line333b​ , ​line334i​

See also

188

(ultra) heavy fuel

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Formula: ​77,4​
Default value: 77(You may put a more plant specific value here.)

Used in lines: ​line214​ , ​line234c​ , ​line333c​ , ​line334b​

See also

189

diesel oil

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Formula: ​74,1​
Default value: 74(You may put a more plant specific value here.)

Used in lines: ​line215​ , ​line234d​ , ​line331a​ , ​line332a​ , ​line333d​ , ​line334c​

See also

190

natural gas

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Formula: ​56,1​
Default value: 56(You may put a more plant specific value here.)

Used in lines: ​line216​ , ​line234e​ , ​line332b​ , ​line333e​ , ​line334d​

See also

191

shale

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​107​ (You may put a more plant specific value here.)

Used in lines: ​line217​ , ​line234f​ , ​line333f​

See also

192

lignite

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​101​ (You may put a more plant specific value here.)

Used in lines: ​line217a​

See also

192a

gasoline*

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Formula: ​69,3​
Default value: 69(You may put a more plant specific value here.)

Used in lines: ​line331b​

See also

192d

other fossil fuels (Equipment and On-Site Vehicles)*

Unit [kg CO2/GJ]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line331ba​

See also

192b

other fossil fuels (Room Heating and Cooling)*

Unit [kg CO2/GJ]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line332c​

See also

192c

other fossil fuels (On-Site Power Generation)*

Unit [kg CO2/GJ]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line334j​

See also

CO2 emission factors of fuels, expressed in kg CO2 per GJ lower heating value (net calorific value). Default emission factors are taken from Worksheet "Fuel CO2 Factors". Enter plant- or company-specific emission factors if available.

194

waste oil

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​74​ (You may put a more plant specific value here.)

Used in lines: ​line219​ , ​line233a​

See also

195

tyres

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​85​ (You may put a more plant specific value here.)

Used in lines: ​line220​ , ​line233a​

See also

196

RDF including plastics*

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​75​ (You may put a more plant specific value here.)

Used in lines: ​line221​ , ​line233a​

See also

197

solvents

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​74​ (You may put a more plant specific value here.)

Used in lines: ​line222​ , ​line233a​

See also

198

impregnated saw dust

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​75​ (You may put a more plant specific value here.)

Used in lines: ​line223​ , ​line233a​

See also

199

mixed industrial waste

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​83​ (You may put a more plant specific value here.)

Used in lines: ​line223a​ , ​line233a​

See also

199a

bio and mixed diesel*

Unit [kg CO2/GJ]
Type number input
Default value: 74(You may put a more plant specific value here.)

Used in lines: ​line331a​ , ​line331d​

See also

200

other fossil based wastes and mixed fuels

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: 80(You may put a more plant specific value here.)

Used in lines: ​line224​ , ​line233a​ , ​line235a​ , ​line236a​ , ​line333h​ , ​line333j​ , ​line334g​ , ​line334e​

See also

Biomass content of fuels, expressed in % biogenic carbon per total carbon content. Default factors are taken from Worksheet "Fuel CO2 Factors". Enter plant- or company-specific biomass factors if available.

200a

biomass in waste oil*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line169​ , ​line183a​ , ​line233a​

See also

200b

biomass in tyres*

Unit [ % Cbio/TOC]
Type number input
Comment: Input of plant specific emission factor possible.
Formula: ​27,0%​
Default value: .270(You may put a more plant specific value here.)

Used in lines: ​line170​ , ​line183a​ , ​line233a​

See also

200c

biomass in RDF including plastics*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line171​ , ​line183a​ , ​line233a​

See also

200d

biomass in solvents*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line172​ , ​line183a​ , ​line233a​

See also

200e

biomass in impregnated saw dust*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line173​ , ​line183a​ , ​line233a​

See also

200f

biomass in mixed industrial waste*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line173a​ , ​line183a​ , ​line233a​

See also

200g

biomass in bio and mixed diesel*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line096b​ , ​line096d​ , ​line331a​ , ​line331d​

See also

200h

biomass in other fossil based wastes and mixed fuels*

Unit [ % Cbio/TOC]
Type number input
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line174​ , ​line183a​ , ​line184h​ , ​line184j​ , ​line233a​ , ​line236a​ , ​line333h​ , ​line333j​ , ​line334g​ , ​line334e​

See also

CO2 emission factors of fuels, expressed in kg CO2 per GJ lower heating value (net calorific value). Default emission factors are taken from Worksheet "Fuel CO2 Factors". Enter plant- or company-specific emission factors if available.

202

sewage sludge

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​110​ (You may put a more plant specific value here.)

Used in lines: ​line226​

See also

203

wood, non impregnated saw dust

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​110​ (You may put a more plant specific value here.)

Used in lines: ​line227​

See also

204

paper, carton

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​110​ (You may put a more plant specific value here.)

Used in lines: ​line228​

See also

205

animal meal

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​89​ (You may put a more plant specific value here.)

Used in lines: ​line229​

See also

206

animal bone meal

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​89​ (You may put a more plant specific value here.)

Used in lines: ​line230​

See also

207

animal fat

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​89​ (You may put a more plant specific value here.)

Used in lines: ​line231​

See also

208

agricultural, organic, diaper waste, charcoal

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​110​ (You may put a more plant specific value here.)

Used in lines: ​line232​

See also

209

other biomass

Unit [kg CO2/GJ]
Type number input
Comment: Input of plant specific emission factor possible.
Default value: ​110​ (You may put a more plant specific value here.)

Used in lines: ​line233​ , ​line236a​ , ​line333j​ , ​line334e​

See also

* Click to see changes in V3

CO2 Emissions from Kiln Fuels

Table 36: Plant Sheet - CO2 Emissions from Kiln Fuels

Line Title Comment

211

Conventional fossil fuels - total emissions

Unit [t CO2/yr]
Type calculated
Comment: These are the total CO2 emissions from all conventional fossil kiln fuels. This result is registered in line 40 above
Formula: IF(COUNTBLANK( ​line212​ : ​line217a​ )=7,"",SUM( ​line212​ : ​line217a​ ))

Used in lines: ​line040​

See also

This table calculates CO2 emissions by multiplying the heat consumption (in TJ/year, lines 162 ff) with the corresponding emission factors (given in lines 186ff)

212

coal + anthracite

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line162​ ="","", ​line162​ * ​line186​ )

Used in lines: ​line211​

See also

213

petrol coke

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line163​ ="","", ​line163​ * ​line187​ )

Used in lines: ​line211​

See also

214

(ultra) heavy fuel

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line164​ ="","", ​line164​ * ​line188​ )

Used in lines: ​line211​

See also

215

diesel oil

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line165​ ="","", ​line165​ * ​line189​ )

Used in lines: ​line211​

See also

216

natural gas

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line166​ ="","", ​line166​ * ​line190​ )

Used in lines: ​line211​

See also

217

shale

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line167​ ="","", ​line167​ * ​line191​ )

Used in lines: ​line211​

See also

217a

lignite

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line167a​ ="","", ​line167a​ * ​line192​ )

Used in lines: ​line211​

See also

 

218

Alternative fossil and mixed fuels - total fossil emissions*

Unit [t CO2/yr]
Type calculated
Formula: IF(COUNTBLANK( ​line219​ : ​line224​ )=7,"",SUM( ​line219​ : ​line224​ ))

Used in lines: ​line041​

See also

This table calculates CO2 emissions by multiplying the heat consumption (in TJ/year, lines 169 ff) with the corresponding emission factors (given in lines 194ff)

219

waste oil / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line169​ ="","", ​line169​ * ​line194​ )

Used in lines: ​line218​

See also

220

waste tyres / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line170​ ="","", ​line170​ * ​line195​ )

Used in lines: ​line218​

See also

221

RDF including plastics / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line171​ ="","", ​line171​ * ​line196​ )

Used in lines: ​line218​

See also

222

solvents / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line172​ ="","", ​line172​ * ​line197​ )

Used in lines: ​line218​

See also

223

impregnated saw dust / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line173​ ="","", ​line173​ * ​line198​ )

Used in lines: ​line218​

See also

223a

mixed industrial waste / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line173a​ ="","", ​line173a​ * ​line199​ )

Used in lines: ​line218​

See also

224

other fossil based wastes / fossil content*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line174​ ="","", ​line174​ * ​line200​ )

Used in lines: ​line218​

See also

 

225

Biomass fuels - total, incl. biomass cont. from alternative mixed fuels*

Unit [t CO2/yr]
Type calculated
Comment: These are the total CO2 emissions from all biomass kiln fuels. This result is registered in line 50 above
Formula: IF(COUNTBLANK( ​line226​ : ​line233a​ )=9,"",SUM( ​line226​ : ​line233a​ ))

Used in lines: ​line050​

See also

This table calculates CO2 emissions by multiplying the heat consumption (in TJ/year, lines 176 ff) with the corresponding emission factors (given in lines 202ff)

226

sewage sludge

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line176​ ="","", ​line176​ * ​line202​ )

Used in lines: ​line225​

See also

227

wood, non impregnated saw dust

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line177​ ="","", ​line177​ * ​line203​ )

Used in lines: ​line225​

See also

228

paper, carton

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line178​ ="","", ​line178​ * ​line204​ )

Used in lines: ​line225​

See also

229

animal meal

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line179​ ="","", ​line179​ * ​line205​ )

Used in lines: ​line225​

See also

230

animal bone meal

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line180​ ="","", ​line180​ * ​line206​ )

Used in lines: ​line225​

See also

231

animal fat

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line181​ ="","", ​line181​ * ​line207​ )

Used in lines: ​line225​

See also

232

agricultural, organic, diaper waste, charcoal

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line182​ ="","", ​line182​ * ​line208​ )

Used in lines: ​line225​

See also

233

other biomass

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line183​ ="","", ​line183​ * ​line209​ )

Used in lines: ​line225​

See also

233a

biomass content from alternative fuels*

Unit [t CO2/yr]
Type calculated
Formula: ( ​line109​ * ​line139​ * ​line200a​ * ​line194​ + ​line110​ * ​line140​ * ​line200b​ * ​line195​ + ​line111​ * ​line141​ * ​line200c​ * ​line196​ + ​line112​ * ​line142​ * ​line200d​ * ​line197​ + ​line113​ * ​line143​ * ​line200e​ * ​line198​ + ​line113a​ * ​line143a​ * ​line200f​ * ​line199​ + ​line114​ * ​line144​ * ​line200h​ * ​line200​ )/1000

Used in lines: ​line225​

See also

* Click to see changes in V3

Drying of raw materials and fuels

Table 37: Plant Sheet - Drying of raw materials and fuels

Line Title Comment

234

Conventional fossil fuels - total emissions*

Unit [t CO2/yr]
Type calculated
Comment: These are the total CO2 emissions from all conventional fossil fuels, for drying of raw materials and fuels. This result is registered in line 40 above
Formula: IF(COUNTBLANK( ​line234a​ : ​line234f​ )=6,"",SUM( ​line234a​ : ​line234f​ ))

Used in lines: ​line040​

See also

This table calculates CO2 emissions by multiplying the heat consumption (in TJ/year, lines 184a ff) with the corresponding emission factors (given in lines 186ff)

234a

coal + anthracite + lignite*

Unit [t CO2/yr]
Type calculated
Comment: line184a (TJ/yr of coal, anthracite and lignite) * line186 (EF of coal and anthracite). This means, if a plant uses a mixture of coal, anthracite and lignite for drying of raw materials, the consumed energy amount is multiplied with a slightly incorrect emission factor for anthracite and coal. The emission factor in line186 shall not be adapted, because otherwise the more important main input stream of coal and anthracite into the kiln would be result in really wrong CO2 emissions.
Formula: IF( ​line184a​ ="","", ​line184a​ * ​line186​ )

Used in lines: ​line234​

See also

234b

petrol coke*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line184b​ ="","", ​line184b​ * ​line187​ )

Used in lines: ​line234​

See also

234c

(ultra) heavy fuel*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line184c​ ="","", ​line184c​ * ​line188​ )

Used in lines: ​line234​

See also

234d

diesel oil*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line184d​ ="","", ​line184d​ * ​line189​ )

Used in lines: ​line234​

See also

234e

natural gas*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line184e​ ="","", ​line184e​ * ​line190​ )

Used in lines: ​line234​

See also

234f

shale*

Unit [t CO2/yr]
Type calculated
Formula: IF( ​line184f​ ="","", ​line184f​ * ​line191​ )

Used in lines: ​line234​

See also

 

235

Alternative fossil fuels - fossil total emissions*

Unit [t CO2/yr]
Type calculated
Comment: These are the total CO2 emissions from all alternative fossil fuels, for drying of raw materials and fuels. This result is registered in line 41 above
Formula: ​line235a​

Used in lines: ​line041​

See also

235a

other fossil based wastes / fossil content*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the heat consumption (in TJ/year, line184h) with the corresponding emission factors (given in line200)
Formula: IF( ​line184h​ ="","", ​line184h​ * ​line200​ )

Used in lines: ​line235​

See also

236

Alternative biomass fuels - biomass total emissions*

Unit [t CO2/yr]
Type calculated
Comment: These are the total CO2 emissions from all biomass fuels, for drying of raw materials and fuels. This result is registered in line 50 above
Formula: ​line236a​

Used in lines: ​line050​

See also

236a

other biomass (incl. biomass content of mixed fuels)*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the heat consumption (in TJ/year, line184j) with the corresponding emission factors (given in line 209)
Formula: IF( ​line184j​ ="","",( ​line126a​ * ​line156a​ /1000* ​line209​ )+( ​line125a​ * ​line155a​ /1000* ​line200​ * ​line200h​ ))

Used in lines: ​line236​

See also

* Click to see changes in V3

Non-Kiln Fuel Consumption in tonnes per year

Table 38: Plant Sheet - Non-Kiln Fuel Consumption in tonnes per year

Line Title Comment

301

Equipment and On-Site Vehicles fossil fuels*

This table lists the consumption of fossil fuels used by equipment and on-site vehicles in tonnes per year. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate in the seperate calculation and using the input line for other fuels.

301a

diesel oil

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321a​

See also

301b

gasoline

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321b​

See also

301ba

other fossil fuels*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321ba​

See also

 

301d

bio and mixed diesel*

Unit [t/yr]
Type number input
Comment: This cell lists the consumption of fuels containing biomass used by equipment and on-site vehicles in tonnes per year.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321d​

See also

This table lists the consumption of fossil fuels used for room heating and cooling in tonnes per year. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriatein the seperate calculation and using the input line for other fuels.

302a

diesel oil

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line322a​

See also

302b

natural gas

Unit [1'000 Nm3/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line322b​

See also

302c

other fossil fuels*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line322c​

See also

This table lists the consumption of conventional fossil fuels used for drying of raw materials and mineral components in tonnes per year. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate.

303a

coal + anthracite+ lignite*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323a​

See also

303b

petrol coke*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323b​

See also

303c

(ultra) heavy fuel*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323c​

See also

303d

diesel oil*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323d​

See also

303e

natural gas*

Unit [1'000 Nm3/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323e​

See also

303f

shale*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323f​

See also

 

303h

other fossil based wastes and mixed fuels*

Unit [t/yr]
Type number input
Comment: This cell lists the consumption of alternative fossil fuels used for drying of raw materials and mineral components in tonnes per year.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323h​

See also

303j

other biomass*

Unit [t/yr]
Type number input
Comment: This cell lists the consumption of alternative biomass fuels used for drying of raw materials and mineral components in tonnes per year.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323j​

See also

This table lists the consumption of conventional fossil fuels used on-site power generation in tonnes per year. Some fuel types are clustered for reasons of simplicity, but may be unclustered as appropriate in the seperate calculation and using the input line for other fuels.

304a

coal + anthracite + lignite

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324a​

See also

304b

(ultra) heavy fuel

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324b​

See also

304c

diesel oil

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324c​

See also

304d

natural gas

Unit [1'000 Nm3/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324d​

See also

304i

petrol coke*

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324i​

See also

304j

other fossil fuels

Unit [t/yr]
Type number input
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324j​

See also

 

304f

Alternative fossil and mixed fuels*

304g

other fossil based wastes and mixed fuels*

Unit [t/yr]
Type number input
Comment: This cell lists the consumption of alternative fossil fuels used on-site power generation in tonnes per year.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324g​

See also

304e

other biomass*

Unit [t/yr]
Type number input
Comment: This cell lists the consumption of alternative biomass fuels used on-site power generation in tonnes per year.
Validation: Validation Ranges for plant with kiln operation: 0 - 100,000; Validation Ranges for grinding centre:0 - 100,000
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324e​

See also

* Click to see changes in V3

Non-Kiln Fuel Lower Heating Values

Table 39: Plant Sheet - Non-Kiln Fuel Lower Heating Values

Line Title Comment
Average lower heating value (= net calorific value) of fuels, expressed in GJ per t of consumed fuel. Default lower heating values are taken from the lines 132-137a (fuel lower heating values of conventional fossil fuels). Enter more specific lower heating values for this fuel if available.

311a

diesel oil

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line135 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Formula: ​line154d​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321a​

See also

311b

gasoline

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321b​

See also

311ba

other fossil fuels*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321ba​

See also

 

311d

bio and mixed diesel*

Unit [GJ/t]
Type number input
Comment: Average lower heating values (= net calorific value) and CO2 emission factors of fuels containing biomass. Emission factors are used as specified for kiln and non-kiln fuels in lines 186-200.
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line321d​

See also

Average lower heating value (= net calorific value) of fuels, expressed in GJ per t of consumed fuel. Default lower heating values are taken from the lines 132-137a (fuel lower heating values of conventional fossil fuels). Enter more specific lower heating values for this fuel if available.

312a

diesel oil

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line135 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Formula: ​line154d​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line322a​

See also

312b

natural gas

Unit [GJ/1'000 Nm3]
Type number input
Instruction: This line is per default referenced to the lower heating value in line136 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Formula: ​line154e​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line322b​

See also

312c

other fossil fuels*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line322c​

See also

Average lower heating value (= net calorific value) of fuels, expressed in GJ per t of consumed fuel. Default lower heating values are taken from the lines 132-137a (fuel lower heating values of conventional fossil fuels). Enter more specific lower heating values for this fuel if available.

313a

coal + anthracite + lignite*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line132 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 5 - 40; Validation Ranges for grinding centre:5 - 40
Formula: ​line132​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323a​

See also

313b

petrol coke*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line133 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 30 - 45; Validation Ranges for grinding centre:30 - 45
Formula: ​line133​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323b​

See also

313c

(ultra) heavy fuel*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line134 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Formula: ​line134​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323c​

See also

313d

diesel oil*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line135 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Formula: ​line135​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323d​

See also

313e

natural gas*

Unit [GJ/1'000 Nm3]
Type number input
Instruction: This line is per default referenced to the lower heating value in line136 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Formula: ​line136​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323e​

See also

313f

shale*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line137 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Formula: ​line137​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323f​

See also

 

313g

Alternative fossil and mixed fuels*

313h

other fossil based wastes and mixed fuels*

Unit [GJ/t]
Type number input
Comment: Average lower heating values (= net calorific value) and CO2 emission factors of alternative fossil fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 303h (for example, based on dry weight). Emission factors are used as specified for kiln and non-kiln fuels in lines 186-200.
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323h​

See also

313i

Alternative biomass fuels*

313j

other biomass*

Unit [GJ/t]
Type number input
Comment: Average lower heating values (= net calorific value) and CO2 emission factors of alternative biomass fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 303j (for example, based on dry weight). Emission factors are used as specified for kiln and non-kiln fuels in lines 186-200.
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line323j​

See also

Average lower heating value (= net calorific value) of fuels, expressed in GJ per t of consumed fuel. Default lower heating values are taken from the lines 132-137a (fuel lower heating values of conventional fossil fuels). Enter more specific lower heating values for this fuel if available.

314a

coal + anthracite + lignite

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line132 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 5 - 40; Validation Ranges for grinding centre:5 - 40
Formula: ​line132​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324a​

See also

314b

(ultra) heavy fuel

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line134 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Formula: ​line134​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324b​

See also

314c

diesel oil

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line135 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 50; Validation Ranges for grinding centre:10 - 50
Formula: ​line135​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324c​

See also

314d

natural gas

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line136 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Formula: ​line136​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324d​

See also

314i

petrol coke*

Unit [GJ/t]
Type number input
Instruction: This line is per default referenced to the lower heating value in line133 of the conventional fossil kiln fuels section. It can be overwritten, if required.
Validation: Validation Ranges for plant with kiln operation: 30 - 45; Validation Ranges for grinding centre:30 - 45
Formula: ​line133​
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324i​

See also

314j

other fossil fuels*

Unit [GJ/t]
Type number input
Validation: Validation Ranges for plant with kiln operation: 10 - 45; Validation Ranges for grinding centre:10 - 45
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324j​

See also

 

314g

other fossil based wastes and mixed fuels*

Unit [GJ/t]
Type number input
Comment: Average lower heating values (= net calorific value) and CO2 emission factors of alternative fossil fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 304g (for example, based on dry weight). Emission factors are used as specified for kiln and non-kiln fuels in lines 186-200.
Validation: Validation Ranges for plant with kiln operation: 10 - 40; Validation Ranges for grinding centre:10 - 40
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324g​

See also

314e

other biomass*

Unit [GJ/t]
Type number input
Comment: Average lower heating values (= net calorific value) and CO2 emission factors of alternative biomass fuels. Values should refer to the same moisture content as the fuel consumption data listed in lines 304e (for example, based on dry weight). Emission factors are used as specified for kiln and non-kiln fuels in lines 186-200.
Validation: Validation Ranges for plant with kiln operation: 10 - 25; Validation Ranges for grinding centre:10 - 25
Default value: 0(You may put a more plant specific value here.)

Used in lines: ​line324e​

See also

* Click to see changes in V3

Non-Kiln Fuel Consumption in terajoules (TJ) per year

Table 40: Plant Sheet - Non-Kiln Fuel Consumption in terajoules (TJ) per year

Line Title Comment

321

Equipment and On-Site Vehicles fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of equipment and on-site vehicles. The result is registered in line 30 above
Comment: This line shows the calculated total value of annual fossil fuel consumption in terajoules of equipment and on-site vehicles
Formula: IF(COUNTBLANK( ​line321a​ : ​line321ba​ )=3,"",SUM( ​line321a​ : ​line321ba​ ))

Used in lines: ​line030​ , ​line096b​ , ​line096c​ , ​line096d​

See also

Heat consumption calculated from non-kiln fuel consumption and lower heating values

321a

diesel oil

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual fuel consumption of diesel oil used as fossil fuel in equipment and on-site vehicles in terajoules.
Formula: IF( ​line301a​ ="","", ​line301a​ * ​line311a​ /1000)

Used in lines: ​line321​ , ​line331a​

See also

321b

gasoline

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual fuel consumption of gasoline used as fossil fuel in equipment and on-site vehicles in terajoules.
Formula: IF( ​line301b​ ="","", ​line301b​ * ​line311b​ /1000)

Used in lines: ​line321​ , ​line331b​

See also

321ba

other fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual fuel consumption of other fossil based wastes (if entered above) used as fossil fuel in equipment and on-site vehicles in terajoules.
Formula: IF( ​line301ba​ ="","", ​line301ba​ * ​line311ba​ /1000)

Used in lines: ​line321​ , ​line331ba​

See also

 

321c

Equipment and On-Site Vehicles fuels (containing biomass)*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of equipment and on-site vehicles of biomass fuels
Comment: This line shows the calculated total annual consumption value of fuel which contains biomass and are used for equipment and on-site vehicles, in terajoules
Formula: ​line321d​

Used in lines: ​line030​ , ​line096b​ , ​line096c​ , ​line096d​ , ​line331a​

See also

321d

bio and mixed diesel*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption calculated from non-kiln fuel consumption and lower heating values of biomass fuels.
Comment: This line shows the calculated annual consumption value of diesel oil which contains biomass and is used for equipment and on/site vehicles, e.g. bio diesel, in terajoules
Formula: IF( ​line301d​ ="","", ​line301d​ * ​line311d​ /1000)

Used in lines: ​line321c​ , ​line331a​ , ​line331d​

See also

322

Room Heating and Cooling

Unit [TJ/yr]
Type calculated
Comment: This is the sum of room heating and cooling. The result is registered in line 31a above
Comment: This line shows the calculated total value of annual fuel consumption used for room heating and cooling
Formula: IF(COUNTBLANK( ​line322a​ : ​line322c​ )=3,"",SUM( ​line322a​ : ​line322c​ ))

Used in lines: ​line031a​ , ​line096b​ , ​line096c​ , ​line096d​

See also

Heat consumption calculated from non-kiln fuel consumption and lower heating values

322a

diesel oil

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual diesel oil consumption used for room heating and cooling in terajoules
Formula: IF( ​line302a​ ="","", ​line302a​ * ​line312a​ /1000)

Used in lines: ​line322​ , ​line332a​

See also

322b

natural gas

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual natural gas consumption which used for room heating and cooling in terajoules
Formula: IF( ​line302b​ ="","", ​line302b​ * ​line312b​ /1000)

Used in lines: ​line322​ , ​line332b​

See also

322c

other fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual other fossil fuels (in case you have entered above) consumption which used for room heating and cooling in terajoules
Formula: IF( ​line302c​ ="","", ​line302c​ * ​line312c​ /1000)

Used in lines: ​line322​ , ​line332c​

See also

 

323k

Conventional fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of drying of raw materials and mineral components from conventional fossil fuels. The result is registered in line 31b above
Comment: This line shows the calculated total value of annual conventional fossil fuels consumption used for drying of mineral components in terajoules
Formula: IF(COUNTBLANK( ​line323a​ : ​line323f​ )=6,"",SUM( ​line323a​ : ​line323f​ ))

Used in lines: ​line031b​ , ​line096b​ , ​line096c​ , ​line096d​

See also

Heat consumption calculated from non-kiln fuel consumption and lower heating values

323a

coal + anthracite + lignite*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual coal, anthracite, waste coal and lignite mix consumption which used for drying of mineral components in terajoules
Formula: IF( ​line303a​ ="","", ​line303a​ * ​line313a​ /1000)

Used in lines: ​line323k​ , ​line333a​

See also

323b

petrol coke*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual petrol coke consumption used for drying of mineral components in terajoules
Formula: IF( ​line303b​ ="","", ​line303b​ * ​line313b​ /1000)

Used in lines: ​line323k​ , ​line333b​

See also

323c

(ultra) heavy fuel*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual ultra heavy fuel consumption used for drying of mineral components in terajoules
Formula: IF( ​line303c​ ="","", ​line303c​ * ​line313c​ /1000)

Used in lines: ​line323k​ , ​line333c​

See also

323d

diesel oil*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual diesel oil consumption which used for drying of mineral components in terajoules
Formula: IF( ​line303d​ ="","", ​line303d​ * ​line313d​ /1000)

Used in lines: ​line323k​ , ​line333d​

See also

323e

natural gas*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual natural gas consumption which used for drying of mineral components in terajoules
Formula: IF( ​line303e​ ="","", ​line303e​ * ​line313e​ /1000)

Used in lines: ​line323k​ , ​line333e​

See also

323f

shale*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual shale consumption used for the drying of mineral components in terajoules
Formula: IF( ​line303f​ ="","", ​line303f​ * ​line313f​ /1000)

Used in lines: ​line323k​ , ​line333f​

See also

 

323g

Alternative fossil and mixed fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of drying of raw materials and mineral components from alternative fossil fuels. The result is registered in line 31b above
Comment: This line shows the calculated total value of annual alternative fossil fuels consumption used for the drying of mineral components in terajoules
Formula: ​line323h​

Used in lines: ​line031b​ , ​line096b​ , ​line096c​ , ​line096d​

See also

323h

other fossil based wastes and mixed fuels*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption calculated from non-kiln fuel consumption and lower heating values
Comment: This line shows the calculated value of annual other fossil based wastes (in case you have entered above) consumption used for the drying of mineral components in terajoules
Formula: IF( ​line303h​ ="","", ​line303h​ * ​line313h​ /1000)

Used in lines: ​line323g​ , ​line333h​ , ​line333j​

See also

323i

Alternative biomass fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of drying of raw materials and mineral components from alternative biomass fuels. The result is registered in line 31b above
Comment: This line shows the calculated total value of annual alternative biomass fuels consumption used for the drying of mineral components in terajoules
Formula: ​line323j​

Used in lines: ​line031b​ , ​line096b​ , ​line096c​ , ​line096d​

See also

323j

other biomass*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption calculated from non-kiln fuel consumption and lower heating values
Comment: This line shows the calculated value of annual other biomass (in case you have entered above) consumption which used for drying of mineral components in terajoules
Formula: IF( ​line303j​ ="","", ​line303j​ * ​line313j​ /1000)

Used in lines: ​line323i​ , ​line333j​

See also

324aa

Conventional fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of on-site power generation from conventional fossil fuels. The result is registered in line 31c above
Comment: This line shows the calculated total value of annual conventional fossil fuels consumption used for on-site power generation in terajoules
Formula: IF(COUNTBLANK( ​line324a​ : ​line324j​ )=6,"",SUM( ​line324a​ : ​line324j​ ))

Used in lines: ​line031c​ , ​line096b​ , ​line096c​ , ​line096d​

See also

Heat consumption calculated from non-kiln fuel consumption and lower heating values

324a

coal + anthracite + lignite

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual coal, anthracite and waste coal mix consumption used for on-site power generation in terajoules
Formula: IF( ​line304a​ ="","", ​line304a​ * ​line314a​ /1000)

Used in lines: ​line324aa​ , ​line334a​

See also

324b

(ultra) heavy fuel

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual ultra heavy fuel consumption used for on-site power generation in terajoules
Formula: IF( ​line304b​ ="","", ​line304b​ * ​line314b​ /1000)

Used in lines: ​line324aa​ , ​line334b​

See also

324c

diesel oil

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual diesel oil consumption used for on-site power generation in terajoules
Formula: IF( ​line304c​ ="","", ​line304c​ * ​line314c​ /1000)

Used in lines: ​line324aa​ , ​line334c​

See also

324d

natural gas

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual natural gas consumption used for on-site power generation in terajoules
Formula: IF( ​line304d​ ="","", ​line304d​ * ​line314d​ /1000)

Used in lines: ​line324aa​ , ​line334d​

See also

324i

petrol coke*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual petrol coke consumption used for on-site power generation in terajoules
Formula: IF( ​line304i​ ="","", ​line304i​ * ​line314i​ /1000)

Used in lines: ​line324aa​ , ​line334i​

See also

324j

other fossil fuels*

Unit [TJ/yr]
Type calculated
Comment: This line shows the calculated value of annual other fossil fuel (if entered above) consumption used for on-site power generation in terajoules
Formula: IF( ​line304j​ ="","", ​line304j​ * ​line314j​ /1000)

Used in lines: ​line324aa​ , ​line334j​

See also

 

324f

Alternative fossil and mixed fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of on-site power generation from alternative fossil fuels. The result is registered in line 31c above
Comment: This line shows the calculated total value of annual alternative fossil fuels consumption used for on-site power generation in terajoules
Formula: ​line324g​

Used in lines: ​line031c​ , ​line096b​ , ​line096c​ , ​line096d​

See also

324g

other fossil based wastes and mixed fuels*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption calculated from non-kiln fuel consumption and lower heating values
Comment: This line shows the calculated value of annual other fossil based wastes (iif entered above) consumption used for on-site power generation in terajoules
Formula: IF( ​line304g​ ="","", ​line304g​ * ​line314g​ /1000)

Used in lines: ​line324f​ , ​line334g​ , ​line334e​

See also

324h

Alternative biomass fuels*

Unit [TJ/yr]
Type calculated
Comment: This is the sum of on-site power generation from biomass fuels. The result is registered in line 31c above
Comment: This line shows the calculated total value of annual alternative biomass fuels consumption used for on-site power generation in terajoules
Formula: ​line324e​

Used in lines: ​line031c​ , ​line096b​ , ​line096c​ , ​line096d​

See also

324e

other biomass*

Unit [TJ/yr]
Type calculated
Comment: Heat consumption calculated from non-kiln fuel consumption and lower heating values
Comment: This line shows the calculated value of annual other biomass (iif entered above) consumption which used for on-site power generation in terajoules
Formula: IF( ​line304e​ ="","", ​line304e​ * ​line314e​ /1000)

Used in lines: ​line324h​ , ​line334e​

See also

* Click to see changes in V3

CO2 Emissions from Non-Kiln fuels

Table 41: Plant Sheet - CO2 Emissions from Non-Kiln fuels

Line Title Comment

331

Equipment and On-Site Vehicles

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of equipment and on-site vehicles. The result is registered in line 44 above
Comment: This line shows the calculated total value of annual CO2 emission from fossil fuel in tonnes used in equipment and on-site vehicles
Formula: IF(COUNTBLANK( ​line331a​ : ​line331ba​ )=3,"",SUM( ​line331a​ : ​line331ba​ ))

Used in lines: ​line044​

See also

This table calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 321 ff) with the appropriate emission factors (lines 186ff, except for gasoline where the emission factor is taken from line is 311b)

331a

diesel oil (incl. fossil CO2 of mixed diesel)

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from diesel oil used as fossil fuel in equipment and on-site vehicles.
Formula: IF(OR( ​line321a​ ="", ​line321c​ =""),"", ​line321a​ * ​line189​ + ​line321d​ * ​line199a​ *(1- ​line200g​ ))

Used in lines: ​line331​

See also

331b

gasoline

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from gasoline used as fossil fuel in equipment and on-site vehicles.
Formula: IF( ​line321b​ ="","", ​line321b​ * ​line192a​ )

Used in lines: ​line331​

See also

331ba

other fossil fuels*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other fossil based wastes (if entered above) used as fossil fuel in equipment and on-site vehicles .
Formula: IF( ​line321ba​ ="","", ​line321ba​ * ​line192d​ )

Used in lines: ​line331​

See also

 

331c

Equipment and On-Site Vehicles biomass fuels*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of equipment and on-site vehicles(biomass fuels).The result is registered in line 50 above
Comment: This line shows the calculated total annual value of CO2 emissions in tonnes from fuel which contains biomass and is used for equipment and on-site vehicles
Formula: ​line331d​

Used in lines: ​line050​

See also

331d

bio diesel (biogenic CO2 of bio or mixed diesel)*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 321d) with the emission factor (lines 199a) and Biomass content (line200g)
Comment: This line shows the calculated annual CO2 emissions in tonnes from diesel oil which contains biomass and is used for equipments and on/site vehicles, e.g. bio diesel
Formula: IF( ​line321d​ ="","", ​line321d​ * ​line199a​ * ​line200g​ )

Used in lines: ​line331c​

See also

332

Room Heating and Cooling

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of room heating and cooling. The result is registered in line 45a above
Comment: This line shows the calculated total value of annual CO2 emissions in tonnes from fuel used for room heating and cooling
Formula: IF(COUNTBLANK( ​line332a​ : ​line332c​ )=3,"",SUM( ​line332a​ : ​line332c​ ))

Used in lines: ​line045a​

See also

This table calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 322ff) with the appropriate emission factors (lines 186ff)

332a

diesel oil

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from diesel oil used for room heating and cooling
Formula: IF( ​line322a​ ="","", ​line322a​ * ​line189​ )

Used in lines: ​line332​

See also

332b

natural gas

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from natural gas used for room heating and cooling
Formula: IF( ​line322b​ ="","", ​line322b​ * ​line190​ )

Used in lines: ​line332​

See also

332c

other fossil fuels*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other fossil fuels (in case you have entered above) which used for room heating and cooling
Formula: IF( ​line322c​ ="","", ​line322c​ * ​line192b​ )

Used in lines: ​line332​

See also

 

333k

Conventional fossil fuels*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of drying of raw materials and mineral components from conventional fossil fuels. The result is registered in line 45b above
Comment: This line shows the calculated total value of annual CO2 emissions in tonnes from conventional fossil fuels used for the drying of mineral components
Formula: IF(COUNTBLANK( ​line333a​ : ​line333f​ )=6,"",SUM( ​line333a​ : ​line333f​ ))

Used in lines: ​line045b​

See also

This table calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 323 ff) with the appropriate emission factors (lines 186ff)

333a

coal + anthracite + lignite*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from coal, anthracite, waste coal and lignite mix used for drying of mineral components
Formula: IF( ​line323a​ ="","", ​line323a​ * ​line186​ )

Used in lines: ​line333k​

See also

333b

petrol coke*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from petrol coke consumption used for drying of mineral components
Formula: IF( ​line323b​ ="","", ​line323b​ * ​line187​ )

Used in lines: ​line333k​

See also

333c

(ultra) heavy fuel*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from ultra heavy fuel consumption used for the drying of mineral components
Formula: IF( ​line323c​ ="","", ​line323c​ * ​line188​ )

Used in lines: ​line333k​

See also

333d

diesel oil*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from diesel oil used for the drying of mineral components
Formula: IF( ​line323d​ ="","", ​line323d​ * ​line189​ )

Used in lines: ​line333k​

See also

333e

natural gas*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from natural gas which used for drying of mineral components
Formula: IF( ​line323e​ ="","", ​line323e​ * ​line190​ )

Used in lines: ​line333k​

See also

333f

shale*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from shale used for drying of mineral components
Formula: IF( ​line323f​ ="","", ​line323f​ * ​line191​ )

Used in lines: ​line333k​

See also

 

333g

Alternative fossil fuels - fossil total emissions*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of drying of raw materials and mineral components from alternative fossil fuels. The result is registered in line 45b above
Comment: This line shows the calculated total value of annual CO2 emissions in tonnes from alternative fossil fuels used for the drying of mineral components
Formula: ​line333h​

Used in lines: ​line045b​

See also

333h

other fossil based wastes / fossil content*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 323h) with the emission factors (lines200) and biomass content (line200h)
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other fossil based wastes (if entered above) used for the drying of mineral components
Formula: IF( ​line323h​ ="","", ​line323h​ * ​line200​ *(1- ​line200h​ ))

Used in lines: ​line333g​

See also

333i

Alternative biomass fuels - biomass total emissions*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of drying of raw materials and mineral components from biomass fuels. The result is registered in line 50 above
Comment: This line shows the calculated total value of annual alternative biomass fuels consumption used for the drying of mineral components in terajoules
Formula: ​line333j​

Used in lines: ​line050​

See also

333j

other biomass (incl. biomass content of mixed fuels)*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 323j) with the emission factors (line209)
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other biomass (if entered above) used for the drying of mineral components
Formula: IF( ​line323j​ ="","",( ​line323j​ * ​line209​ )+( ​line323h​ * ​line200​ * ​line200h​ ))

Used in lines: ​line333i​

See also

334aa

Conventional fossil fuels*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of on-site power generation from conventional fossil fuels. The result is registered in line 45c above
Comment: This line shows the calculated total value of annual CO2 emissions in tonnes from conventional fossil fuels used for on-site power generation
Formula: IF(COUNTBLANK( ​line334a​ : ​line334j​ )=6,"",SUM( ​line334a​ : ​line334j​ ))

Used in lines: ​line045c​

See also

This table calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 324a -324j) with the appropriate emission factors (lines 186ff)

334a

coal + anthracite + lignite

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from coal, anthracite and waste coal mix used for on-site power generation
Formula: IF( ​line324a​ ="","", ​line324a​ * ​line186​ )

Used in lines: ​line334aa​

See also

334b

(ultra) heavy fuel

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from ultra heavy fuel used for on-site power generation
Formula: IF( ​line324b​ ="","", ​line324b​ * ​line188​ )

Used in lines: ​line334aa​

See also

334c

diesel oil

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from diesel oil used for on-site power generation
Formula: IF( ​line324c​ ="","", ​line324c​ * ​line189​ )

Used in lines: ​line334aa​

See also

334d

natural gas

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from natural gas used for on-site power generation
Formula: IF( ​line324d​ ="","", ​line324d​ * ​line190​ )

Used in lines: ​line334aa​

See also

334i

petrol coke*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from petrol coke used for on-site power generation
Formula: IF( ​line324i​ ="","", ​line324i​ * ​line187​ )

Used in lines: ​line334aa​

See also

334j

other fossil fuels*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other fossil fuel (in case you have entered above) used for on-site power generation
Formula: IF( ​line324j​ ="","", ​line324j​ * ​line192c​ )

Used in lines: ​line334aa​

See also

 

334f

Alternative fossil fuels - fossil total emissions*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of on-site power generation from alternative fossil fuels. The result is registered in line 45c above
Comment: This line shows the calculated total value of annual CO2 emissions in tonnes from alternative fossil fuels used for on-site power generation
Formula: ​line334g​

Used in lines: ​line045c​

See also

334g

other fossil based wastes / fossil content*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, line324g) with the emission factors (line200) and biomass content (line200h)
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other fossil based wastes (if entered above) used for on-site power generation
Formula: IF( ​line324g​ ="","", ​line324g​ * ​line200​ *(1- ​line200h​ ))

Used in lines: ​line334f​

See also

334h

Alternative biomass fuels - biomass total emissions*

Unit [t CO2/yr]
Type calculated
Comment: This is the sum of on-site power generation. The result is registered in line 50 above
Comment: This line shows the calculated total value of annual CO2 emissions in tonnes from alternative biomass fuels used for on-site power generation
Formula: ​line334e​

Used in lines: ​line050​

See also

334e

other biomass (incl. biomass content of mixed fuels)*

Unit [t CO2/yr]
Type calculated
Comment: This cell calculates CO2 emissions by multiplying the Heat consumption (in TJ/year, lines 324e) with the emission factors (line209)
Comment: This line shows the calculated value of annual CO2 emissions in tonnes from other biomass (if entered above) used for on-site power generation
Formula: IF( ​line324e​ ="","",( ​line324e​ * ​line209​ )+( ​line324g​ * ​line200​ * ​line200h​ ))

Used in lines: ​line334h​

See also

* Click to see changes in V3

Calcination Sheet A1

Raw meal

Table 42: Calcination Sheet A1 - Raw meal

Line Title Comment

500

Kiln feed (dry weight)

Unit [t/yr]
Type number input

See also

501

Dust return correction of kiln feed*

Unit [%, dry weight]
Type number input

See also

502

Raw meal (RM) loss on ignition (LOIRM)*

Unit [%, dry weight]
Type number input

See also

503

Raw meal consumed = Kiln feed *(1-Dust return correction)

Unit [t/yr]
Type calculated
Comment: This line does not require any data. It shows the calculated number of tonnes of raw meal consumed per year.
Formula: ​line500​ *(1- ​line501​ )

See also

504

CO2 amount (LOI raw meal consumed)

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 in tonnes resulting from consumed LOI raw material per year.
Formula: ​line500​ *(1- ​line501​ )* ​line502​

See also

505

Emission factor of raw meal consumed*

Unit [t CO2/t RM]
Type calculated
Comment: The calculated value of emission factor is shown on this line in unites of tonnes of CO2 per tonne of raw meal.
Formula: IF( ​line503​ =0,"", ​line504​ / ​line503​ )

See also

* Click to see changes in V3

CKD leaving the kiln system

Table 43: Calcination Sheet A1 - CKD leaving the kiln system

Line Title Comment

510

CKD leaving the kiln system (dry weight)

Unit [t/yr]
Type number input

See also

511

CKD loss on ignition (LOICKD)

Unit [%, dry weight]
Type number input

See also

512

CKD calcination rate d

Unit [%]
Type calculated
Comment: The line shows the calculated percentage which represents the CKD calcination rate.
Formula: 1-(( ​line511​ *(1- ​line502​ ))/((1- ​line511​ )* ​line502​ ))

See also

513

Emission factor CKD

Unit [t CO2/t CKD]
Type calculated
Comment: This line has a calculated value of the emission factor in units of tonne of CO2 per tonne CKD.
Formula: ​line502​ * ​line512​ /(1- ​line502​ * ​line512​ )

See also

514

CO2 amount of CKD leaving the kiln system

Unit [t CO2/yr]
Type calculated
Comment: The calculated value of CO2 amount of CKD leaving the kiln system is shown on this line in unites of tonnes of CO2 per year.
Formula: IF( ​line510​ =0,0, ​line510​ * ​line513​ )

See also

* Click to see changes in V3

Absolute CO2 emissions from calcination

Table 44: Calcination Sheet A1 - Absolute CO2 emissions from calcination

Line Title Comment

520

CO2 amount (LOI raw meal consumed, fully calcined clinker and bypass dust)

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from LOI raw material consumed in annual tonnes of CO2.
Formula: ​line504​

See also

521

CO2 amount of CKD leaving the kiln system

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from CKD which is leaving the kiln system in annual tonnes of CO2.
Formula: ​line514​

See also

522

Total CO2 from raw materials (including CKD leaving the kiln system and organic carbon content)

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated total value of CO2 amount from raw materials (including CKD leaving the kiln system and organic carbon content).
Formula: SUM( ​line520​ : ​line521​ )

See also

* Click to see changes in V3

Data Simple Output Method (A1)

Table 45: Calcination Sheet A1 - Data Simple Output Method (A1)

Line Title Comment

525

Output CalcA1: Raw meal consumption (=Plant sheet lines 34e)

Unit [t/yr]
Type calculated
Comment: The final output value of raw meal consumption of this sheet is stated here as a calculated result in annual tonnes of raw meal.
Formula: ​line503​

See also

526

Output CalcA1: Total CO2 from raw materials (=Plant sheet line 34f)*

Unit [t CO2/yr]
Type calculated
Comment: The final output value of total CO2 from raw material of this sheet is stated here as a calculated result in annual tonnes of CO2.
Formula: ​line522​

See also

* Click to see changes in V3

Calcination Sheet A2

General Plant Information

Table 46: Calcination Sheet A2 - General Plant Information

Line Title Comment

001

Plant

Unit name
Type text input

See also

002

Company

Unit name
Type text input

See also

003

Country

Unit select
Type selection

See also

* Click to see changes in V3

Raw meal

Table 47: Calcination Sheet A2 - Raw meal

Line Title Comment

600

Kiln feed

Unit [t/yr, dry weight]
Type number input

See also

601

Dust return correction of kiln feed*

Unit [%, dry weight]
Type number input

See also

602

Raw meal CO2 content (fCO2RM)

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

603

Raw meal consumed = Kiln feed *(1-Dust return correction)

Unit [t/yr]
Type calculated
Comment: The line shows the calculated number of tonnes of raw meal consumed per year
Formula: ​line600​ *(1- ​line601​ )

See also

604

CO2 amount (CO2 of raw meal consumed)

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 in tonnes resulting from consumed raw material per year
Formula: ​line603​ * ​line602​

See also

605

Emission factor of raw meal consumed*

Unit [t CO2/t RM]
Type calculated
Comment: The calculated value of emission factor is shown on this line in unites of tonne CO2 per tonne of raw meal.
Formula: IF( ​line603​ =0,"", ​line604​ / ​line603​ )

See also

* Click to see changes in V3

Additional raw material # 1 (not part of kiln feed)

Table 48: Calcination Sheet A2 - Additional raw material # 1 (not part of kiln feed)

Line Title Comment

610

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

611

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

612

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from the additional raw material you have entered above.
Formula: ​line610​ * ​line611​

See also

* Click to see changes in V3

Additional raw material # 2 (not part of kiln feed)

Table 49: Calcination Sheet A2 - Additional raw material # 2 (not part of kiln feed)

Line Title Comment

613

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

614

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

615

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from additional raw material you have entered above.
Formula: ​line613​ * ​line614​

See also

* Click to see changes in V3

Additional raw material # 3 (not part of kiln feed)

Table 50: Calcination Sheet A2 - Additional raw material # 3 (not part of kiln feed)

Line Title Comment

616

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

617

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

618

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from the additional raw material you have entered above. CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.
Formula: ​line616​ * ​line617​

See also

* Click to see changes in V3

Additional raw material # 4 (not part of kiln feed)

Table 51: Calcination Sheet A2 - Additional raw material # 4 (not part of kiln feed)

Line Title Comment

619

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

620

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

621

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year which resultung from the additional raw material you have entered above.
Formula: ​line619​ * ​line620​

See also

* Click to see changes in V3

Additional raw material # 5 (not part of kiln feed)

Table 52: Calcination Sheet A2 - Additional raw material # 5 (not part of kiln feed)

Line Title Comment

622

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

623

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

624

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from the additional raw material you have entered above.
Formula: ​line622​ * ​line623​

See also

* Click to see changes in V3

Additional raw material # 6 (not part of kiln feed)

Table 53: Calcination Sheet A2 - Additional raw material # 6 (not part of kiln feed)

Line Title Comment

625

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

626

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

627

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from the additional raw material you have entered above.
Formula: ​line625​ * ​line626​

See also

* Click to see changes in V3

Additional raw material # 7 (not part of kiln feed)

Table 54: Calcination Sheet A2 - Additional raw material # 7 (not part of kiln feed)

Line Title Comment

628

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

629

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

630

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from the additional raw material you have entered above.
Formula: ​line628​ * ​line629​

See also

* Click to see changes in V3

Additional raw material # 8 (not part of kiln feed)

Table 55: Calcination Sheet A2 - Additional raw material # 8 (not part of kiln feed)

Line Title Comment

631

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

632

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

633

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year resulting from the additional raw material you have entered above.
Formula: ​line631​ * ​line632​

See also

* Click to see changes in V3

Additional raw material # 9 (not part of kiln feed)

Table 56: Calcination Sheet A2 - Additional raw material # 9 (not part of kiln feed)

Line Title Comment

634

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

635

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

636

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year which is resultingfrom the additional raw material you have entered above.
Formula: ​line634​ * ​line635​

See also

* Click to see changes in V3

Additional raw material # 10 (not part of kiln feed)

Table 57: Calcination Sheet A2 - Additional raw material # 10 (not part of kiln feed)

Line Title Comment

637

Additional raw material (ARM)

Unit [t/yr, dry weight]
Type number input

See also

638

ARM CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

639

ARM CO2 amount

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount in tonne per year which resulting from the additional raw material you have entered above.
Formula: ​line637​ * ​line638​

See also

* Click to see changes in V3

bypass dust correction for uncalcined fraction

Table 58: Calcination Sheet A2 - bypass dust correction for uncalcined fraction

Line Title Comment

650

Bypass dust leaving the kiln system

Unit [t/yr, dry weight]
Type number input

See also

651

Bypass dust CO2 content

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

652

Correction for uncalcined fraction of Bypass dust (residual CO2 content)*

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of correction for uncalcined fraction of bypass dust.
Formula: ​line650​ * ​line651​

See also

* Click to see changes in V3

CKD leaving the kiln system

Table 59: Calcination Sheet A2 - CKD leaving the kiln system

Line Title Comment

655

CKD leaving the kiln system

Unit [t/yr, dry weight]
Type number input

See also

656

CKD CO2 content (fCO2CKD)

Unit [%, dry weight]
Type number input
Comment: CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.

See also

657

d (CKD calcination rate)

Unit [%]
Type calculated
Comment: The line shows the calculated percentage which represents the CKD calcination rate.
Formula: 1-(( ​line656​ *(1- ​line602​ ))/((1- ​line656​ )* ​line602​ ))

See also

658

Emission Factor CKD

Unit [t CO2/t CKD]
Type calculated
Comment: This line has a calculated value of emission factor in units of tonne CO2 per tonne CKD.
Formula: ​line602​ * ​line657​ /(1- ​line602​ * ​line657​ )

See also

659

CO2 amount of CKD leaving the kiln system

Unit [t CO2/yr]
Type calculated
Comment: The calculated value of CO2 amount of CKD leaving the kiln system is shown on this line in units of tonne CO2 per year.
Formula: IF( ​line655​ =0,0, ​line655​ * ​line658​ )

See also

* Click to see changes in V3

Total of additional raw materials (not part of kiln feed)

Table 60: Calcination Sheet A2 - Total of additional raw materials (not part of kiln feed)

Line Title Comment

665

Additional raw materials (ARM)

Unit [t/yr, dry weight]
Type calculated
Comment: This line shows the calculated value of additional raw material (ARM) ,which is not part of the kiln, in annual dry tonnes.
Formula: SUM( ​line610​ , ​line613​ , ​line616​ , ​line619​ , ​line622​ , ​line625​ , ​line628​ , ​line631​ , ​line634​ , ​line637​ )

See also

666

ARM CO2 content

Unit [%, dry weight]
Type calculated
Comment: This line shows the calculated value of CO2 content in additional raw material (ARM), which is not part of the kiln, in percentage of dry weight. CO2 from total carbon is used as clarification for the analytical parameters of the Detailed Input Method A2. The term "CO2 content", which is used in the and in the, leads to misunderstandings.
Formula: IF(G116>0, ​line667​ /G116,"")

See also

667

CO2 amount of additional raw materials

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from additional raw material (which is not a part of kiln system) in annual tonnes.
Formula: SUM( ​line612​ , ​line615​ , ​line618​ , ​line621​ , ​line624​ , ​line627​ , ​line630​ , ​line633​ , ​line636​ , ​line639​ )

See also

* Click to see changes in V3

Absolute CO2 emissions from raw material calcination and organic carbon content

Table 61: Calcination Sheet A2 - Absolute CO2 emissions from raw material calcination and organic carbon content

Line Title Comment

671

CO2 amount of raw material consumed

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from raw material consumed in annual tonnes of CO2.
Formula: ​line604​

See also

672

CO2 amount of CKD leaving the kiln system

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from CKD which is leaving the kiln system in annual tonnes of CO2.
Formula: ​line659​

See also

673

Correction for uncalcined fraction of bypass dust

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of correction for uncalcined fraction of bypass dust in annual tonnes of CO2.
Formula: ​line652​

See also

674

CO2 amount of additional raw materials

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from additional raw materials in annual tonnes of CO2.
Formula: ​line667​

See also

676

Total CO2 from raw materials (including CKD leaving the kiln system and organic carbon content)

Unit [t CO2/yr]
Type calculated
Comment: This line shows the calculated value of CO2 amount from raw materials (including CKD leaving the kiln system and organic carbon content).
Formula: IF(G123>0,G123+ ​line672​ - ​line673​ + ​line674​ ,"")

See also

* Click to see changes in V3

Data Detailed Output Method (A2)

Table 62: Calcination Sheet A2 - Data Detailed Output Method (A2)

Line Title Comment

681

Output CalcA2: Raw meal consumption (=Plant sheet lines 34i)

Unit [t/yr]
Type calculated
Comment: The final output value of raw meal consumption of this sheet is stated here as a calculated result in annual tonnes of raw meal.
Formula: ​line603​

See also

682

Output CalcA2: Total CO2 from raw materials (=Plant sheet line 34j)

Unit [t CO2/yr]
Type calculated
Comment: The final output value of total CO2 from raw material of this sheet is stated here as a calculated result in annual tonnes of CO2.
Formula: ​line676​

See also

* Click to see changes in V3

Calcination Sheet B2

General Plant Information

Table 63: Calcination Sheet B2 - General Plant Information

Line Title Comment

001

Plant

Unit name
Type text input

See also

002

Company

Unit name
Type text input

See also

003

Country

Unit select
Type selection

See also

* Click to see changes in V3

Clinker # 1

Table 64: Calcination Sheet B2 - Clinker # 1

Line Title Comment

700

Clinker produced

Unit [t/yr]
Type number input

See also

701

CaO content (incl. free lime)

Unit [%]
Type number input

See also

702

MgO content

Unit [%]
Type number input

See also

703

CaO amount

Unit [t/yr]
Type calculated
Comment: This line is a result line and therefore does not need to be filled with data. The value shown in this line represents the annual tonnes of CaO in clinker type1.
Formula: ​line700​ * ​line701​

See also

704

MgO amount

Unit [t/yr]
Type calculated
Comment: This line is a result line and therefore does not need to be filled with data. The shown value in this line represents the annual tonnes of MgO in clinker type1.
Formula: ​line700​ * ​line702​

See also

* Click to see changes in V3

Clinker # 2

Table 65: Calcination Sheet B2 - Clinker # 2

Line Title Comment

705

Clinker produced

Unit [t/yr]
Type number input

See also

706

CaO content (incl. free lime)

Unit [%]
Type number input

See also

707

MgO content

Unit [%]
Type number input

See also

708

CaO amount

Unit [t/yr]
Type calculated
Comment: This line is a result line and therefore does not need to be filled with data. The value shown in this line represents the annual tonnes of CaO in clinker type2.
Formula: ​line705​ * ​line706​

See also

709

MgO amount

Unit [t/yr]
Type calculated
Comment: This line is a result line and therefore does not need to be filled with data.The value shown in this line represents the annual tonnes of MgO in clinker type2.
Formula: ​line705​ * ​line707​

See also

* Click to see changes in V3

Total clinker

Table 66: Calcination Sheet B2 - Total clinker

Line Title Comment

730

Total clinker produced

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual clinker amount produced in tonnes, so you do not have to enter any data here.
Formula: ​line700​ + ​line705​

See also

731

Average CaO content (incl. free lime)

Unit [%]
Type calculated
Comment: This line shows the calculated value of average CaO content in percentage, so you do not have to enter any data here.
Formula: IF( ​line730​ =0,0, ​line733​ / ​line730​ )

See also

732

Average MgO content

Unit [%]
Type calculated
Comment: This line shows the calculated value of average MgO content in percentage, so you do not have to enter any data here.
Formula: IF( ​line730​ =0,0, ​line734​ / ​line730​ )

See also

733

Total CaO amount

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of total annual CaO amount, so you do not have to enter any data here.
Formula: ​line703​ + ​line708​

See also

734

Total MgO amount

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of total annual MgO amount, so you do not have to enter any data here.
Formula: ​line704​ + ​line709​

See also

* Click to see changes in V3

Raw material # 1

Table 67: Calcination Sheet B2 - Raw material # 1

Line Title Comment

740

non-carbonate source in raw material consumed*

Unit [t/yr, dry weight]
Type number input

See also

741

CaO content*

Unit [%, dry weight]
Type number input
Comment: Percentage values should not be more than 100% (=1).

See also

742

MgO content*

Unit [%, dry weight]
Type number input
Comment: Percentage values should not be more than 100% (=1).

See also

743

CaO amount

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of CaO in raw material #1.
Formula: ​line740​ * ​line741​

See also

744

MgO amount

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of MgO in raw material #1.
Formula: ​line740​ * ​line742​

See also

* Click to see changes in V3

Raw material # 2

Table 68: Calcination Sheet B2 - Raw material # 2

Line Title Comment

745

non-carbonate source in raw material consumed*

Unit [t/yr, dry weight]
Type number input

See also

746

CaO content*

Unit [%, dry weight]
Type number input

See also

747

MgO content*

Unit [%, dry weight]
Type number input

See also

748

CaO amount

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of CaO in raw material #2.
Formula: ​line745​ * ​line746​

See also

749

MgO amount

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of MgO in raw material #2.
Formula: ​line745​ * ​line747​

See also

* Click to see changes in V3

Total of raw materials

Table 69: Calcination Sheet B2 - Total of raw materials

Line Title Comment

770

Total raw material consumed*

Unit [t/yr, dry weight]
Type calculated
Formula: ​line740​ + ​line745​

See also

771

Average CaO content*

Unit [%, dry weight]
Type calculated
Formula: IF( ​line770​ =0,0, ​line773​ / ​line770​ )

See also

772

Average MgO content*

Unit [%, dry weight]
Type calculated
Formula: IF( ​line770​ =0,0, ​line774​ / ​line770​ )

See also

773

Total CaO amount

Unit [t/yr]
Type calculated
Formula: ​line743​ + ​line748​

See also

774

Total MgO amount

Unit [t/yr]
Type calculated
Formula: ​line744​ + ​line749​

See also

* Click to see changes in V3

Raw material # 1

Table 70: Calcination Sheet B2 - Raw material # 1

Line Title Comment

780

Ca/Mg-silicate source Raw material consumed*

Unit [t/yr, dry weight]
Type number input

See also

781

Ca content of Ca-Silicate raw materials*

Unit [%, dry weight]
Type number input

See also

782

Mg content of Mg-Silicate raw materials*

Unit [%, dry weight]
Type number input

See also

783

CaSi amount*

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of CaSi amount in raw material #1.
Formula: ​line780​ * ​line781​

See also

784

MgSi amount*

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of MgSi amount in raw material #1.
Formula: ​line780​ * ​line782​

See also

* Click to see changes in V3

Raw material # 2

Table 71: Calcination Sheet B2 - Raw material # 2

Line Title Comment

785

Ca/Mg-silicate source Raw material consumed*

Unit [t/yr, dry weight]
Type number input

See also

786

Ca content of Ca-Silicate raw materials*

Unit [%, dry weight]
Type number input

See also

787

Mg content of Mg-Silicate raw materials*

Unit [%, dry weight]
Type number input

See also

788

Ca amount*

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of CaSi amount in raw material #2.
Formula: ​line785​ * ​line786​

See also

789

Mg amount*

Unit [t/yr]
Type calculated
Comment: This line shows the calculated value of annual tonnes of MgSi amount in raw material #2.
Formula: ​line785​ * ​line787​

See also

* Click to see changes in V3

Total of raw materials

Table 72: Calcination Sheet B2 - Total of raw materials

Line Title Comment

800

Total raw material consumed*

Unit [t/yr, dry weight]
Type calculated
Comment: This line shows the calculated value of annual total dry tonnes of raw material consumed. Only raw materials entering the kiln and raw materials with relevant content of Ca-silicate and Mg-silicate must be reported here. Recycled dust should not be counted.
Formula: ​line780​ + ​line785​

See also

801

Average Ca content*

Unit [%, dry weight]
Type calculated
Comment: This line shows the calculated value of Ca content of Ca-Silicate raw material in percentage.
Formula: IF( ​line800​ =0,0, ​line803​ / ​line800​ )

See also

802

Average Mg content*

Unit [%, dry weight]
Type calculated
Comment: This line shows the calculated value of Mg content of raw material in percentage.
Formula: IF( ​line800​ =0,0, ​line804​ / ​line800​ )

See also

803

Total Ca amount*

Unit [t/yr]
Type calculated
Formula: ​line783​ + ​line788​

See also

804

Total Mg amount*

Unit [t/yr]
Type calculated
Formula: ​line784​ + ​line789​

See also

* Click to see changes in V3

Absolute CO2 emissions

Table 73: Calcination Sheet B2 - Absolute CO2 emissions

Line Title Comment

810

Uncorrected CO2 emissions, based on CaO- and MgO content of clinker

Unit [t CO2/yr]
Type calculated
Formula: ​line733​ / ​56,078​ * ​44,010​ + ​line734​ / ​40,304​ * ​44,010​

See also

811

Correction for non-carbonate sources of CaO and MgO

Unit [t CO2/yr]
Type calculated
Formula: ​line773​ / ​56,078​ * ​44,010​ + ​line774​ / ​40,304​ * ​44,010​

See also

812

Correction for silicate sources of CaO and MgO found in clinker*

Unit [t CO2/yr]
Type calculated
Formula: ​line803​ / ​40,078​ * ​44,010​ + ​line804​ / ​24,305​ * ​44,010​

See also

813

Corrected, direct CO2 emissions

Unit [t CO2/yr]
Type calculated
Formula: ​line810​ - ​line811​ - ​line812​

See also

* Click to see changes in V3

Specific CO2 emissions per ton of clinker

Table 74: Calcination Sheet B2 - Specific CO2 emissions per ton of clinker

Line Title Comment

815

Calcination factor, uncorrected

Unit [kg CO2/t cli]
Type calculated
Formula: IF( ​line730​ =0,0, ​line810​ / ​line730​ *1000)

See also

816

Calcination emission factor corrected for non-carbonate and silicate sources of CaO,MgO

Unit [kg CO2/t cli]
Type calculated
Formula: IF( ​line730​ =0,0, ​line813​ / ​line730​ *1000)

See also

* Click to see changes in V3

Data Detailed Input Method (B2)

Table 75: Calcination Sheet B2 - Data Detailed Input Method (B2)

Line Title Comment

820

Output CalcB2: Calcination emission factor corrected for non-carbonate and silicate sources of CaO, MgO in clinker (=Plant sheet line 34q)

Unit [kg CO2/t cli]
Type calculated
Formula: ​line816​

See also

* Click to see changes in V3

© 2011 - 2014 by WBCSD Cement Sustainability Initiative (CSI) / ECRA GmbH
Cement CO2 and Energy Protocol, Internet Manual, created 08.12.2014